Concrete
Contents |
[edit] Introduction
Concrete is the most commonly used man-made material on earth. It is an important construction material used extensively in buildings, bridges, roads and dams. Its uses range from structural applications, to paviours, kerbs, pipes and drains.
Concrete is a composite material, consisting mainly of Portland cement, water and aggregate (gravel, sand or rock). When these materials are mixed together, they form a workable paste which then gradually hardens over time.
For the different types, see Types of concrete.
[edit] History
A material similar to concrete was first developed by the Egyptians, consisting of lime and gypsum. Typically, lime, chalk or oyster shells continued being used as the cement forming agent until the early-1800s.
In 1824, Portland cement, a mixture of limestone and clay was burned and ground, and since then, this has remained the predominant cementing agent used in concrete production.
[edit] Benefits of concrete
There are numerous positive aspects of concrete:
- It is a relatively cheap material and has a relatively long life with few maintenance requirements.
- It is strong in compression.
- Before it hardens it is a very pliable substance that can easily be shaped.
- It is non-combustible.
[edit] Limitations of concrete
The limitations of concrete include:
- Relatively low tensile strength when compared to other building materials.
- Low ductability.
- Low strength-to-weight ratio.
- It is susceptible to cracking.
[edit] Characteristics of concrete
The characteristics of concrete are determined by the aggregate or cement used, or by the method that is used to produce it. The water-to-cement ratio is the determining factor in ordinary structural concrete with a lower water content resulting in a stronger concrete.
This, however, reduces the workability (and pumpability) of the concrete, which can be measured using the slump test. The grading, shape, texture and proportion of aggregate can also have a similar affect. If a particularly strong concrete is required, the amount of aggregate can be reduced in relation to the cement. However, cement is a significant cost factor, and increasing its proportion in the mix will increase the overall price.
When making concrete, admixtures can be used to alter the characteristics of the concrete. For example accelerators can be used to make it set more rapidly, retarders to make it set more slowly, superplasticisers to reduce the water content etc.
For more information, see The properties of concrete.
[edit] Concrete strength
Concrete strength is determined by the force required to crush it and is measured in pounds per square inch or kilograms per square centimetre. Strength can be affected by many variables including moisture and temperature.
The tensile strength of concrete can be improved with the addition of metal rods, wires, cables or mesh. Where very high tensile stresses are expected (such as in wide unsupported spans in roofs or bridges) concrete can include pre-tensioned steel wires. This creates compressive forces in the concrete that help offset the tensile forces that the structure is subject to.
Sacrificial probes can be integrated within concrete to provide strength determination and this is likely to help improve construction methodologies.
For more information, see Testing concrete.
[edit] Formwork
Formwork is a temporary mould into which concrete is poured and formed. Traditional formwork is fabricated using timber, but it can also be constructed from steel, glass fibre reinforced plastics and other materials.
Formwork may be; temporary, re-usable, or stay-in-place. There are also a number of proprietary systems such as those used to support vertical formwork while concrete cures, consisting of a series of tubes and ties.
Efficiency within concrete construction is being improved by the adoption of hybrid solutions and innovations in formwork such as self-climbing forms.
See Formwork for more information.
[edit] Sustainability
Concrete has a relatively high embodied energy, resulting from its extraction, manufacture and transportation. Waste materials can be included within the concrete mix such as Recycled Crushed Aggregate (RCA), Ground Granulated Blast-Furnace Slag (GGBS) and Pulverised Fuel Ash (PFA).
In addition, moves are being made to assess the potential of using recycled concrete, however, issues such as moisture content and material variability may make this unviable.
Concrete is a very durable, low maintenance material and can provide thermal mass, helping reduce the energy consumption of buildings in operation.
[edit] Related articles on Designing Buildings
- 3D concrete printer.
- Admixture, additive or agent.
- Admixtures in concrete.
- Alkali-activated binder.
- Alkali-aggregate reaction (AAR).
- Alkali-silica reaction (ASR).
- Architectural concrete.
- Blocked concrete delivery pumps.
- Cast-in-place concrete.
- Cellular concrete.
- Cement and concrete companies release 2050 Climate Ambition.
- Cement-free precast product.
- Cement mortar.
- Concrete batching plants.
- Concrete boom pumps.
- Concrete in aggressive ground (SD 1).
- Concrete joints.
- Concrete masonry unit CMU.
- Concrete repair mortars.
- Concrete-steel composite structures.
- Concrete superplasticizer.
- Concrete to cover.
- Concrete vs. steel.
- Concreting plant.
- Decarbonising concrete in the UK.
- Defective Concrete Blocks Grant Scheme.
- Differences between jumpform and slipform climbing formwork systems.
- Glass reinforced concrete.
- Hempcrete.
- How to clean concrete.
- Laitance.
- Lime concrete.
- Limestone calcined clay cement LC3.
- Portland cement.
- Precast concrete.
- Prestressed concrete.
- Power float.
- Pyrite and mica redress issues in Dail Eireann.
- Rebar.
- Recycled concrete aggregate RCA.
- Reinforced concrete.
- Scabbling.
- Screed.
- Self-compacting concrete.
- Slip form.
- Smart concrete.
- Spanish brutalism.
- Sprayed in situ concrete.
- Stationary pump skills.
- Stratification of concrete.
- Testing concrete.
- Textile-reinforced mortars TRM.
- The properties of concrete.
- The World Recast: 70 buildings from 70 years of Concrete Quarterly.
- The use of concrete structures to protect construction sites.
- Thomas Edison's concrete cottages.
- Types of concrete.
- Ultra high performance fibre concrete.
- Vibration Compaction Technology.
- What will happen if we use too much rebar in concrete?
Featured articles and news
Future Homes Standard Essentials launched
Future Homes Hub launches new campaign to help the homebuilding sector prepare for the implementation of new building standards.
Building Safety recap February, 2026
Our regular run-down of key building safety related events of the month.
Planning reform: draft NPPF and industry responses.
Last chance to comment on proposed changes to the NPPF.
A Regency palace of colour and sensation. Book review.
Delayed, derailed and devalued
How the UK’s planning crisis is undermining British manufacturing.
How much does it cost to build a house?
A brief run down of key considerations from a London based practice.
The need for a National construction careers campaign
Highlighted by CIOB to cut unemployment, reduce skills gap and deliver on housing and infrastructure ambitions.
AI-Driven automation; reducing time, enhancing compliance
Sustainability; not just compliance but rethinking design, material selection, and the supply chains to support them.
Climate Resilience and Adaptation In the Built Environment
New CIOB Technical Information Sheet by Colin Booth, Professor of Smart and Sustainable Infrastructure.
Turning Enquiries into Profitable Construction Projects
Founder of Develop Coaching and author of Building Your Future; Greg Wilkes shares his insights.
IHBC Signpost: Poetry from concrete
Scotland’s fascinating historic concrete and brutalist architecture with the Engine Shed.
Demonstrating that apprenticeships work for business, people and Scotland’s economy.
Scottish parents prioritise construction and apprenticeships
CIOB data released for Scottish Apprenticeship Week shows construction as top potential career path.
From a Green to a White Paper and the proposal of a General Safety Requirement for construction products.
Creativity, conservation and craft at Barley Studio. Book review.
The challenge as PFI agreements come to an end
How construction deals with inherited assets built under long-term contracts.
Skills plan for engineering and building services
Comprehensive industry report highlights persistent skills challenges across the sector.
Choosing the right design team for a D&B Contract
An architect explains the nature and needs of working within this common procurement route.
Statement from the Interim Chief Construction Advisor
Thouria Istephan; Architect and inquiry panel member outlines ongoing work, priorities and next steps.


























Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.