Finishes
Finishes are used in the final part of the construction or manufacturing process, forming the final surface of an element. They can protect the element they finish from impact, water, frost, corrosion, abrasion, and so on, and/or they can be decorative.
Finishes commonly relate to internal surfaces, but they may also be applied to external elements. They can be applied wet or dry. Some elements are self-finished, that is the final surface is part of the material the element is formed from.
The application of finishes may involve the build up of more than one layer, which, whilst some of the layers will form the final exposed surface, they are nonetheless considered to be finishes. For example, an undercoat or primer might be applied to a wall before the final paint.
NBS categorise finishes as:
- Calcium sulfate based levelling screeds.
- Cement based levelling / wearing screeds.
- Decorative papers / fabrics.
- Edge fixed carpeting.
- Insulation with rendered finish.
- Intumescent coatings for fire protection of steelwork.
- Mastic asphalt flooring/ floor underlays.
- Metal lathing / anchored mesh reinforcement for plastered/ rendered coatings.
- Painting / clear finishing.
- Plastered / rendered / roughcast coatings.
- Resin flooring.
- Rubber / plastics / cork/ lino / carpet tiling / sheeting.
- Sprayed monolithic coatings.
- Stone / concrete / quarry / ceramic tiling / mosaic.
- Terrazzo tiling / in situ terrazzo.
- Wood block / composition block / mosaic parquet flooring.
However, this is some overlap in this categorisation with other building components, and some classifications might place some of these items within other categories. For example, plaster might be considered a lining rather than a finish stone might be considered part of the wall or floor construction, and so on.
Uniclass lists the following ‘decorative’ coatings:
- Aluminium paints.
- Casein paints.
- Cement paints.
- Concrete finishing coats.
- Concrete flash coats.
- Concrete floor dyes.
- Concrete floor paints.
- Concrete stains.
- Distemper.
- High pigment water-borne paint.
- Limewashes.
- Micaceous iron oxide paints.
- Multi-colour coatings.
- Multi-colour finish spatter coatings.
- Oil-bound distempers.
- Plant oil paints.
- Plastic texture paints.
- Resin-based breathable masonry paints.
- Semi-transparent timber stains and dyes.
- Silicate-based masonry coatings.
- Solvent-based finishing coats.
- Solvent-borne gloss finishes.
- Solvent-borne masonry paints.
- Solvent-borne matt and flat finishes.
- Solvent-borne mid-sheen finishes.
- Tallow lime washes.
- Water-borne gloss finishes.
- Water-borne masonry paints.
- Water-borne matt and flat finishes.
- Water-borne mid-sheen finishes.
The choice of finishes might be influenced by factors, such as:
- Colour and appearance (matt, gloss, silk, and so on).
- Texture.
- Maintenance and cleaning requirements.
- Durability.
- Expected life.
- Weather resistance.
- Corrosion resistance.
- Availability.
- Preparation required.
- Ease of application.
- Drying time.
- Cost.
- Safety or environmental issues.
- Waste.
NB The word 'finish' may also refer to the completion of an activity.
[edit] Related articles on Designing Buildings
- Bill of quantities.
- Cladding.
- Corrosion resistance.
- Decoration.
- Equipment.
- Finished surface.
- Fittings.
- Furnishings.
- Furniture.
- Furniture, fixtures and equipment.
- How to paint walls in eight steps.
- Interior designer.
- Intumescent coatings.
- Large-scale murals.
- Paint.
- Paints and coatings.
- Patination.
- Plaster.
- Polished plaster.
- Rendering.
- Room data sheet.
- Specification.
- Splashback.
- Swatch.
- Rendering.
- Resin flooring.
- Tessera.
- Tiles.
- Trompe l’oeil.
Featured articles and news
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
Places of Worship in Britain and Ireland, 1929-1990. Book review.
The emancipation of women in art.
CIOB Construction Manager of the Year 2025
Just one of the winners at the CIOB Awards 2025.
Call for independent National Grenfell oversight mechanism
MHCLG share findings of Building Safety Inquiry in letter to Secretary of State and Minister for Building Safety.
The Architectural Technology Awards
AT Awards now open for this the sixth decade of CIAT.
50th Golden anniversary ECA Edmundson awards
Deadline for submissions Friday 30 May 2025.
The benefits of precast, off-site foundation systems
Top ten benefits of this notable innovation.
Encouraging individuals to take action saving water at home, work, and in their communities.
Takes a community to support mental health and wellbeing
The why of becoming a Mental Health Instructor explained.
Mental health awareness week 13-18 May
The theme is communities, they can provide a sense of belonging, safety, support in hard times, and a sense purpose.
Mental health support on the rise but workers still struggling
CIOB Understanding Mental Health in the Built Environment 2025 shows.
Design and construction material libraries
Material, sample, product or detail libraries a key component of any architectural design practice.
Construction Products Reform Green Paper and Consultation
Still time to respond as consultation closes on 21 May 2025.
Resilient façade systems for smog reduction in Shanghai
A technical approach using computer simulation and analysis of solar radiation, wind patterns, and ventilation.