Regulations for design and construction: Knowledge hub
Contents |
Key takeaways
Regulations are mandatory rules and statutory instruments that govern how buildings are designed, constructed, and occupied—unlike voluntary policies, they carry legal force. Compliance ensures health, safety, accessibility, energy efficiency, and structural performance, while preventing enforcement action, fines, or delays.
This knowledge hub relates specifically to the building regulations. For other regulations see:
- Health and safety / CDM knowledge hub.
- Building safety knowledge hub.
- Legislation knowledge hub.
- Planning permission knowledge hub.
The buildings regulations and why they matter
The building regulations set minimum standards for all aspects from structural integrity to fire safety and energy efficiency. They set out:
- What qualifies as ‘building work’ and so falls under the control of the regulations.
- What types of buildings are exempt (such as temporary buildings).
- The notification procedures that must be followed when starting, carrying out, and completing building work.
- Requirements for specific aspects of building design and construction.
A series of approved documents provide general guidance about how specific aspects of building design and construction can comply with the Building Regulations.
Key articles about the building regulations
Below is a list of some of the most widely-read and important articles about the building regulations on Designing Buildings:
General background articles:
- Approved documents. Series of guidance documents explaining how to meet Building Regulations requirements.
- Approved inspector. Private-sector individual or organisation authorised to verify regulation compliance.
- Building control - regulations and procedures. Details roles of building control bodies and statutory checks.
- Building control body. Organisation verifying building work complies with regulations.
- Building notice. Formal notification to begin building work without full plans.
- Building regulations. Describes Parts A–S and the process of compliance via approved documents.
- Building regulations appeal. Legal challenge against a building regulations decision.
- Building regulations completion certificate. Official certificate confirming work complies at completion.
- Building regulations inspection. Site checks to ensure ongoing compliance with regulations.
- Building warrant (Scotland). Scottish equivalent of consent verifying regulations compliance.
- Competent person schemes. Registered installers allowed to self-certify specified work.
- Do the building regulations apply to existing buildings? Guidance on existing building regulation applicability.
- Failure to comply with the building regulations. Breach of regulations by non-compliant building work.
- Full plans. Detailed drawings submitted for building regulations approval.
- How long it takes to get building regulations approval and how long it lasts. Explanation of approval timeline and validity duration.
- Northern Ireland building regulations. Building regulation framework applicable in Northern Ireland.
- Registered Building Control Approvers. The new name for approved inspectors.
- Scottish building standards. Scottish regulatory framework for building compliance.
- The Building Act. Legislation establishing building regulations regime.
- The difference between planning permission building regulations approval. Contrast between planning and building regulation consent processes.
- The history of building regulations and control. Historical overview of building regulations evolution.
- Welsh building regulations. Wales-specific building regulation framework.
- What approvals are needed before construction begins. Pre-construction approval requirements summary.
- What are regulations? Explains the nature of regulations and lists key types in construction.
The approved documents:
- Approved document A: Structure.
- Approved document B: Fire safety.
- Approved document C: Site preparation and resistance to contaminants and moisture.
- Approved document D: Toxic substances.
- Approved document E: Resistance to the passage of sound.
- Approved document F: Ventilation.
- Approved document G: Sanitation, hot water safety and water efficiency.
- Approved document H: Drainage and waste disposal.
- Approved document J: Heat producing appliances and Fuel storage system.
- Approved document K: Protection from falling, collision and impact.
- Approved document L: Conservation of fuel and power.
- Approved document M: Access to and use of buildings.
- Approved document N: Glazing - Safety in relation to impact, opening and cleaning (withdrawn).
- Approved document O: Overheating.
- Approved document P: Electrical safety.
- Approved document Q: Security - Dwellings.
- Approved document R: Physical infrastructure for high-speed electronic communication networks.
- Approved document S: Infrastructure for the charging of electric vehicles.
- Approved document 7: Materials and workmanship.
All articles about regulations
There are more than 1,000 articles about regulations on Designing Buildings. A full index is available here.
You can access our other subject-specific knowledge hubs here.
Stay up-to-date
This hub will be updated regularly with new guidance, policy changes, and innovations. Bookmark this page or subscribe to our newsletter to stay informed.
This web page is openly licensed via CC BY 4.0.
Featured articles and news
Do you take the lead in a circular construction economy?
Help us develop and expand this wiki as a resource for academia and industry alike.
Warm Homes Plan Workforce Taskforce
Risks of undermining UK’s energy transition due to lack of electrotechnical industry representation, says ECA.
Cost Optimal Domestic Electrification CODE
Modelling retrofits only on costs that directly impact the consumer: upfront cost of equipment, energy costs and maintenance costs.
The Warm Homes Plan details released
What's new and what is not, with industry reactions.
Could AI and VR cause an increase the value of heritage?
The Orange book: 2026 Amendment 4 to BS 7671:2018
ECA welcomes IET and BSI content sign off.
How neural technologies could transform the design future
Enhancing legacy parametric engines, offering novel ways to explore solutions and generate geometry.
Key AI related terms to be aware of
With explanations from the UK government and other bodies.
From QS to further education teacher
Applying real world skills with the next generation.
A guide on how children can use LEGO to mirror real engineering processes.
Data infrastructure for next-generation materials science
Research Data Express to automate data processing and create AI-ready datasets for materials research.
Wired for the Future with ECA; powering skills and progress
ECA South Wales Business Day 2025, a day to remember.
AI for the conservation professional
A level of sophistication previously reserved for science fiction.
Biomass harvested in cycles of less than ten years.
An interview with the new CIAT President
Usman Yaqub BSc (Hons) PCIAT MFPWS.
Cost benefit model report of building safety regime in Wales
Proposed policy option costs for design and construction stage of the new building safety regime in Wales.
Do you receive our free biweekly newsletter?
If not you can sign up to receive it in your mailbox here.























