Prefabricated structural panels
Contents |
[edit] Introduction
Prefabricated structural panels are a form of building product that can be manufactured off-site and assembled on-site, providing an alternative to traditional site-based construction.
They can allow faster construction times, improved quality due to more coordinated supply chain processes, and manufacture in factory environments with controlled conditions. However, detailed design must be provided early in the process as any inaccuracies in or late changes can have a significant impact on cost.
The two main types of structural panels are open and closed:
- Open structural panels are a pre-assembled wall framework which are later fitted with other elements (such as insulation, vapour control layers, external cladding, and so on) on site. While this is quick and flexible compared with traditional construction, it still involves a lot of site work.
- By contrast, closed structural panels are complete pre-assembled wall panels with the other elements included, such as; pre-fitted windows, doors, ducting for internal services, finishes, and so on. Closed panels tend to be larger and heavier, often necessitating a crane for on-site assembly.
The whole life performance of prefabricated panels is dependent on the long-term risk of failure, the use of suitable materials and the integrity and accuracy of connections between panels, floors and roofs. For more information, see Off-site prefabrication of buildings: A guide to connection choices.
[edit] Types of prefabricated panels
Some of the most common types of prefabricated structural panels include:
[edit] Concrete insulated panels
These comprise a robust insulated concrete with a brick outer leaf, and can be manufactured with external windows and doors. They are designed to have a service life of more than 60 years.
[edit] Structural insulated panels (SIPs)
Structural insulated panels (SIPs) are a form of sandwich panel system that incorporates insulation, predominantly used for residential and light commercial construction. They take the form of an insulating foam core sandwiched between two structural facings. SIPs are manufactured under factory-controlled conditions off-site and can be installed quickly once on site. The benefits of using SIPs are that they are high-strength, high-performance, and can be fabricated to fit nearly any building design.
For more information, see Structural insulated panels.
[edit] Timber frame panels
There are several different types of timber frame system, ranging from open ‘stick-built’ systems to closed panels that are pre-fitted with insulation, wiring, plumbing, and so on. Basic timber frame walls comprise studs fixed in place with sheets of plywood or orientated strand board (OSB). When nailed to the studs, the open panel becomes a rigid box into which insulation can be added on site. A waterproof barrier is wrapped around the frame followed by the external wall cladding. Closed panels are delivered to site with these elements pre-installed, minimising the on-site work required.
[edit] Lightweight steel frame panels
These tend to be open panels and overcome the risk of cold bridging by locating insulation on the external side of the frame.
[edit] Insulated concrete formwork (ICF)
ICF, also known as permanently insulated formwork (PIF), is an insulated in situ concrete system based on hollow lightweight block components. The block components, usually made of expanded polystyrene tied together with plastic or steel ties, lock together removing the need for mortar. This creates a formwork system into which concrete is poured to form the structure. While not strictly being an off-site technique, it can be much quicker to install, and provides better insulation, than other construction methods.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.