The building as climate modifier
Remains have been found of simple structures constructed from animal skins draped between sticks dating back over 40,000 years, and it is likely these were the first type of shelter constructed by humans.
Simple tents suited a nomadic lifestyle. Lightweight and easy to carry, they could be moved from place to place in harsh environments where it was necessary to keep on the move to stay alive. Where resources were more plentiful, it was possible to settle down and build permanent shelters in the form of huts. In intermediate environments, a whole range of composite structures developed, part tent, part hut, most notably the Yurt, a demountable hut, still in use in places such as Mongolia today.
This combination of a fundamental requirement for shelter, moderated by practicality and resource availability, still drives the design of our buildings today, and can be seen in as varied typologies as the Troglodytic architecture of sculptured hillside landscapes in Morocco, to the Eskimos’ igloos, to Malaysian tree-dwelling, African courtyard houses, and the English thatched cottage.
In each case, the building fabric acts as a climatic modifier, controlling the extent to which conditions are able to transmit between the outside and the inside. This extent of modification depends on a wide range of factors, including; the materials used, their thickness and form, the way the elements fit together and interact, surface conditions, openings and so on.
In cold climates, buildings offer protection against the wind, rain, the cold, snow, and so on. Curved igloo shapes present the minimum surface area for the largest volume.
In hot and dry climates, there is more of a need for heavy mass buildings and shading. Shaded courtyards are common, and openings allow cross-ventilation. Thick adobe walls can be used to retain heat during the day and release it to the interior as temperatures cool at night. See Thermal mass for more information.
More complex features, such as trombe walls, use a combination of thermal mass and glazing to collect and store solar radiation so that it can be used to heat the interior.
The more effective the fabric of a building as a climatic modifier, the less energy will be required to make conditions within the building comfortable. See Passive building design for more information.
Very broadly, the environmental conditions that the fabric of a building might be required to modify include:
- Air temperature.
- Air movement.
- Humidity.
- Air quality.
- Noise.
- Solar radiation.
- Long wave infra red radiation.
- Visible light.
- Moisture.
However, there can be a conflict between the need for a building to act as a climatic modifier, and other performance requirements, such as privacy, security, access, views, and so on.
Requirements will also change with time of day. For example a building might be required to absorb heat during the day and then purge built up heat during the night. See night-time purging for more information. Similarly, conditions may be very different in the winter and the summer.
Additionally, the environmental conditions experienced by buildings are generally modified versions of the local climate. These microclimates can be affected by:
- Adjacent structures.
- Landscaping, such as trees.
- Topography.
- Local activities such as traffic or industrial processes.
This is a dynamic relationship that is also affected by other parts of the building itself, such as roof overhangs, tall elements, openings, and so on. For example, a roof overhang can be used to moderate the amount of rain that will fall on the wall below. Tall buildings can create wind tunnel effects at ground level, enclosing buildings can stifle air movement, buildings generally can contribute to the urban heat island effect, and so on.
The design of buildings in order to satisfy all these requirements and to minimise the consumption of energy, has lead to increasingly complex dynamic façade designs which can include rainscreens, shading, glazing, thermal mass, insulation, cavities, vapour barriers and so on. This not only requires careful design, but also a high standard of workmanship during construction, in particular to ensure air tightness.
However, there is increasing evidence that buildings do not perform in practice as they were expected to when they were designed. This is for a number of reasons, including; over optimistic calculations, inaccurate modelling, poor detailing, incorrect specification, poor workmanship and a lack of understanding by occupants and operators. For more information see Performance Gap.
A range of standards have been developed to attempt to certify the standard of environmental performance of buildings, such as BREEAM and Passivhaus. Passivhaus suggest that, 'A Passivhaus is a building, for which thermal comfort can be achieved solely by post-heating or post-cooling of the fresh air mass, which is required to achieve sufficient indoor air quality conditions – without the need for additional recirculation of air.’
[edit] Related articles on Designing Buildings Wiki
- Airtight.
- Building.
- Building fabric.
- Cooling systems for buildings.
- Dynamic façade.
- Façade.
- Heating.
- Passivhaus.
- Principles of enclosure.
- The history of fabric structures.
- The thermal behaviour of spaces enclosed by fabric membranes
- Thermal comfort.
- Thermal pleasure in the built environment.
- Trombe wall.
- Ventilation.
- Weathertight.
Featured articles and news
Licensing construction in the UK
As the latest report and proposal to licence builders reaches Parliament.
Building Safety Alliance golden thread guidance
Extensive excel checklist of information with guidance document freely accessible.
Fair Payment Code and other payment initiatives
For fair and late payments, need to work together to add value.
Pre-planning delivery programmes and delay penalties
Proposed for housebuilders in government reform: Speeding Up Build Out.
High street health: converting a building for healthcare uses
The benefits of health centres acting as new anchor sites in the high street.
The Remarkable Pinwill Sisters: from ‘lady woodcarvers’ to professionals. Book review.
Skills gap and investment returns on apprenticeships
ECA welcomes new reports from JTL Training and The Electrotechnical Skills Partnership.
Committee report criticises UK retrofit schemes
CIOB responds to UK’s Energy Security and Net Zero Committee report.
Design and construction industry podcasts
Professional development, practice, the pandemic, platforms and podcasts. Have we missed anything?
C20 Society; Buildings at Risk List 2025
10 more buildings published with updates on the past decade of buildings featured.
Boiler Upgrade Scheme and certifications consultation
Summary of government consultation, closing 11 June 2025.
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
From project managers to rising stars, sustainability pioneers and more.
Places of Worship in Britain and Ireland, 1929-1990. Book review.