Ductwork
Ductwork, ducts, or ducting, are conduits, or tubes, that typically form part of a ventilation system, used to convey air throughout a building. An example of a simple elementary duct is a fireplace chimney, used to convey smoke to the outside. Hard pipes used to transfer water or gas are not classed as ductwork.
Duct design involves planning (laying out), sizing, optimising, and detailing. Ductwork should be among the first items to be considered when designing a new building because of its importance in the overall utility of the building, and the need to integrate complex duct routes with other elements of the overall design. This can be particularly difficult where structural elements pass through building services spaces, such as the downstands of beams, or where ducts have to pass through other elements of the building.
Ducts can be fabricated from a range of materials:
- Galvanised mild steel: This is the most common material used as the zinc coating prevents rust forming.
- Aluminium: This is lightweight and quick to instal. Custom shapes can be easily fabricated as required by the particular design.
- Polyurethane and phenolic foam panels: These are manufactured with aluminium facings on both sides.
- Fibreglass: This provides built-in thermal insulation and sound is absorbed by the interior surface.
- Flex ducts: These are typically made of flexible plastic over a metal wire coil.
Ductwork layouts may be very complex, involving a number of supply and return ducts, that branch to all parts of a building. Typically Heating Ventilation and Air Conditioning (HVAC) ducting will run through voids above a suspended ceiling, supplying and extracting air from the occupied spaces below through diffuser grilles. Air may be drawn or blown through the ducts by fans or by air handling units.
Duct sizes are calculated based on the relationship between air volume, size, air velocity and resistance. The requirements for the provision of air within buildings is set out in Part F of the building regulations, Ventilation.
Air handling units generate noise (and vibration) which can be disruptive, and this can be compounded where ductwork passes between acoustically separate spaces. In this case, acoustic attenuators might be included in the air handling unit or ductwork. In addition, vibration can be generated. This vibration can be isolated by inserting flexible sections between air handling units and ductwork and by isolating the unit from the building structure.
Other components that can be incorporated in ducting systems include:
- Distribution boxes to redirect airflow as required.
- Take-offs, which allow a small portion of the main duct’s flow to be diverted into branch ducts.
- Volume control dampers, which allow for the adjustment of air flow, and may be manual or automatic.
- Smoke and fire dampers where the ductwork passes between fire compartments.
- Turning vanes where there are changes of direction and help minimise turbulence and resistance by guiding the air.
- Access points for cleaning and maintenance.
Before approval, ductwork should be tested to confirm it is adequately sealed.
NB The Scottish Building Standards, Part I. Technical Handbook – Domestic, Appendix A Defined Terms, defines a duct as: ‘…the structure, trunking, or casing, with any apertures, enclosing a passage, other than a flue, used solely for conveying air, gases, or refuse.’
The 2018 International Residential Code (IRC), published by the International Code Council (ICC) defines a duct system as: ‘A continuous passageway for the transmission of air that, in addition to ducts, includes duct fittings, dampers, plenums, fans and accessory air-handling equipment and appliances.’
[edit] Related articles on Designing Buildings
- Air conditioning.
- Air handling unit.
- BSRIA study: The market for European Field Devices.
- Building services.
- Cooling systems for buildings.
- Electrical control systems.
- Flexible ductwork.
- Heating.
- HVAC.
- HVAC balancing.
- Mechanical, electrical and plumbing MEP.
- Mechanical ventilation of buildings.
- Pipework.
- Plant room.
- Raised floor.
- Safe ductwork - Loss Prevention Standard (LPS 2084).
- Thermal comfort.
- Underfloor air conditioning at London Grade II listed landmark.
- Valves.
- Ventilation.
- Vertical riser.
Featured articles and news
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.
Comments
Air duct cleaning units produce commotion which can be problematic, and this can be aggravated where ventilation work goes between acoustically separate spaces. For this situation, acoustic attenuators may be incorporated into the air taking care of unit or ventilation work.