Nail laminated timber NLT
Nail laminated timber (NLT or also called nail-lam) uses standard dimension timbers (normally 2" x 4", 6", 8" or 10"). The individual members are laid on edge and nailed to the next timbers with a relatively high number of long, strong galvanised nails, which gives strength and weight enough to qualify as a massive wood panel product. In German it may be referred to as nail brettstaple, which is translated literally as a nailed board stack but more commonly is associated with dowel laminated timber (DLT) rather than nails.
In the US NLT qualifies as a heavy timber product as a result of the number and length of nails and is used for roofs and where slightly deeper, for floors as well as for vertical wall elements. Where used vertically as shear walls or diaphragms it may have plywood or OSB added to one face to provide improved shear capacity. In the horizontal NLT panel depths of about 100mm can span in a single direction up to around 3.5 metres, increasing to about 8 metres if depths increase 3 fold. Due to their massive wood heavy weight nature they can be used as an alternative to concrete slabs or steel decks in commercial and institutional buildings, as well as residential buildings. Fire rating is likely to be similar to cross laminated timber (CLT) products (normally designed to FR 30,60 or 90 minutes), though in the case of NLT the metal connections should also be protected, for example through the use of sacrificial timbers for charring rate or gypsum board cover. The types and quality of timbers used will also impact fare rating, so in each case specific product designs should be checked against relevant standards, such as ISO 834, EN 1995-1-2, EN 1991-1-2 and in the US chapter 16 of NDS and AWC TR 10.
The main advantages of the product are that it can use relatively low grade sawn timbers from a variety of species, which are readily available in standard dimensions and does not require complex machinery to create panels, which can even be made on site. Although it is classified as a heavy timber product it is in comparison, relatively lightweight and easier to handle than concrete and steel alternatives. It has an aesthetic appeal, with environmental sequestration credentials and because it uses no glue has some consideration to end of life, though not as significant as dowel laminated timber due to the mixing of metal and wood components not easily separated under and end-of-use scenario.
[edit] Related articles on Designing Buildings
- Carpentry.
- Compressive strength of timber lattice columns for low-rise construction.
- Cross laminated timber.
- Dowel Laminated timber.
- Engineered bamboo.
- Engineered wood products.
- Facts about forestry.
- Glulam.
- Janka hardness rating scale.
- Laminated veneer lumber LVL.
- Modified wood.
- Nails - a brief history.
- Plywood.
- Predicting service life of timber structures.
- Sustainable timber.
- Testing timber.
- The differences between hardwood and softwood.
- The use of timber in construction.
- Timber frame.
- Timber vs wood.
- Types of timber.
- Types of timber species.
- Whole life carbon assessment of timber.
- Wood around the world.
Featured articles and news
Biodiversity and the built environment digital series
The nature of building, with CIOB and CWP.
A call for prevention and sensitive re-use.
Risks to the long-term effectiveness of the BNG scheme
National Audit Office publish review of Biodiversity Net Gain.
The CIAT principal designer register
Providing assurance and verification of the capability and competence of registered ATs.
Building Safety recommendations and Northern Ireland
The NI roadmap to improving safety in high rise residential.
BSA residential sector competence standards guidance
BSAS 01:2024 Organisational Capability Management System Standard - Competence Assurance.
Specifying rendered external wall insulation for fire safety
How to interrogate the evidence provided to the specifier.
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
No Falls Week. The importance of safe working at height
What to expect and what is on offer to avoid accidents.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.