Nail laminated timber NLT
Nail laminated timber (NLT or also called nail-lam) uses standard dimension timbers (normally 2" x 4", 6", 8" or 10"). The individual members are laid on edge and nailed to the next timbers with a relatively high number of long, strong galvanised nails, which gives strength and weight enough to qualify as a massive wood panel product. In German it may be referred to as nail brettstaple, which is translated literally as a nailed board stack but more commonly is associated with dowel laminated timber (DLT) rather than nails.
In the US NLT qualifies as a heavy timber product as a result of the number and length of nails and is used for roofs and where slightly deeper, for floors as well as for vertical wall elements. Where used vertically as shear walls or diaphragms it may have plywood or OSB added to one face to provide improved shear capacity. In the horizontal NLT panel depths of about 100mm can span in a single direction up to around 3.5 metres, increasing to about 8 metres if depths increase 3 fold. Due to their massive wood heavy weight nature they can be used as an alternative to concrete slabs or steel decks in commercial and institutional buildings, as well as residential buildings. Fire rating is likely to be similar to cross laminated timber (CLT) products (normally designed to FR 30,60 or 90 minutes), though in the case of NLT the metal connections should also be protected, for example through the use of sacrificial timbers for charring rate or gypsum board cover. The types and quality of timbers used will also impact fare rating, so in each case specific product designs should be checked against relevant standards, such as ISO 834, EN 1995-1-2, EN 1991-1-2 and in the US chapter 16 of NDS and AWC TR 10.
The main advantages of the product are that it can use relatively low grade sawn timbers from a variety of species, which are readily available in standard dimensions and does not require complex machinery to create panels, which can even be made on site. Although it is classified as a heavy timber product it is in comparison, relatively lightweight and easier to handle than concrete and steel alternatives. It has an aesthetic appeal, with environmental sequestration credentials and because it uses no glue has some consideration to end of life, though not as significant as dowel laminated timber due to the mixing of metal and wood components not easily separated under and end-of-use scenario.
[edit] Related articles on Designing Buildings
- Carpentry.
- Compressive strength of timber lattice columns for low-rise construction.
- Cross laminated timber.
- Dowel Laminated timber.
- Engineered bamboo.
- Engineered wood products.
- Facts about forestry.
- Glulam.
- Janka hardness rating scale.
- Laminated veneer lumber LVL.
- Modified wood.
- Nails - a brief history.
- Plywood.
- Predicting service life of timber structures.
- Sustainable timber.
- Testing timber.
- The differences between hardwood and softwood.
- The use of timber in construction.
- Timber frame.
- Timber vs wood.
- Types of timber.
- Types of timber species.
- Whole life carbon assessment of timber.
- Wood around the world.
Featured articles and news
Combating burnout.
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.