Ecodesign compliant stove
EcoDesign compliant stoves are stoves that have been awarded an EcoDesign certificate, that is to say they comply with certain regulations in relation to their environmental impact. In the UK this also means they comply with requirements set out by the Department of Environment, Farming and Rural Affairs.
As of January 2022, although existing stoves do not need to be replaced all new stoves on the market need to be ecodesign compliant. In terms of wood burning stoves that means that they produce significantly less particle emissions (PM 2.5 and others), less organic gaseous compounds (OGC), carbon monoxide (CO) and nitrogen oxides (NOx) which can reduce air quality outside as well as inside the home.
The term Ecodesign related back to the Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of Ecodesign requirements for energy-related products. This directive covered a wide variety of energy related products including stoves, which are listed as solid fuel local space or solid fuel boilers (if they include water heating) below is a list of all products falling within the directive:
- Domestic and service industry lighting products:
- Directional and non-directional lamps (including ultraviolet radiation)
- Fluorescent lamps (without integrated ballast)
- High-intensity discharge lamps
- Ballasts and luminaires able to operate such lamps
- Electrical devices:
- Household appliances:
- Cookers
- Dishwashers
- Freezers
- Refrigerators
- Tumble dryers
- Washing machines
- Vacuum cleaners
- Heating and cooling devices:
- Other products:
- Circulators
- Electric motors
- Electric power consumption standby and off mode
- External power supplies
- Imagining equipment
- Power transformers
- Professional refrigeration
- Water pumps
In the UK specifically, the Clean Air Act was introduced in 1956 a few years after the Great Smog of London, the Act included a definition of smoke control areas. The act was extended in 1968, then replaced by the Clean Air Act 1993, which remains in force, although other acts and bills support it further.
The Government’s Clean Air Strategy of 2019 stated wood and coal stoves accounted for 38 per cent of particulate matter related air pollution, these statistics were the updated in 2022 to indicate that 17% of such pollution was related wood fuels. As of January 2022 all stoves on the market need to be ecodesign compliant, although existing stoves do not need to be replaced. The UK Environmental Improvement Plan of 2023, further defines Smoke Control Areas as areas where wood burners may only emit 3 grams (g) of smoke per hour.
As well as ecodesign compliant stoves, there are what are called DEFRA-exempt stoves, which also significantly reduce emissions, they are related but not always the same and should be checked. Ecodesign stoves are also checked by DEFRA. Other scheme that support initiatives to reduce pollution from wood burners, improve efficiency and safety are: HETAS Cleaner Choice Approval Scheme (DEFRA-exempt and emitting 50% less particulates than required for DEFRA-exemption, the 5 level Clearskies certification scheme, with level 3 being DEFRA-exempt and ecodesign compliant, level 4 releasing 15% less pollutants than ecodesign compliant, and level 5 15% less again.
It is also important to note that maintenance of any stove system is crucial to efficiency, safety and pollution potential, both in terms of the stove itself as well as the chimney of flue which needs cleaning at least yearly. So not all forms of burning are equally polluting even if specifying an ecodesign compliant stove, how well it is used how well it is maintained, and what fuels are burnt in it play a significant role.
[edit] Related articles on Designing Buildings
- Appliance.
- Biomass.
- Cast iron.
- Fire in buildings.
- Fireplace.
- Hearth.
- Kitchen.
- Testing solid fuel stoves.
- Stove.
[edit] External Links
https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX%3A02009L0125-20121204
Featured articles and news
Infrastructure that connect the physical and digital domains.
Harnessing robotics and AI in challenging environments
The key to nuclear decommissioning and fusion engineering.
BSRIA announces Lisa Ashworth as new CEO
Tasked with furthering BSRIA’s impressive growth ambitions.
Public buildings get half a billion energy efficiency boost
£557 million to switch to cleaner heating and save on energy.
CIOB launches pre-election manifesto
Outlining potential future policies for the next government.
Grenfell Tower Inquiry announcement
Phase 2 hearings come to a close and the final report due in September.
Progress from Parts L, F and O: A whitepaper, one year on.
A replicated study to understand the opinion of practitioners.
ECA announces new president 2024
Electrical engineer and business leader Stuart Smith.
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
Tackling the transition from traditional heating systems
59% lack the necessary information and confidence to switch.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.