Types of lamp
Contents |
[edit] Introduction
The term ‘lamp’ refers specifically to a light source, typically comprising a light-emitting element contained within an outer bulb or tube, which generally emits radiation within the visible spectrum.
The term is also used more widely to describe products such as table lamps and floor lamps, although these should more correctly be referred to as light fittings. Light fittings (or sometimes light fixtures) can comprise lamps, lampholders, control gear, housings, and so on.
The term bulb may also be used to describe a lamp, although, more correctly, the bulb is the outer glass part of a lamp which contains the light source.
Lamps may include a reflector and a lens to control the beam angle (or beam spread), they may be dimmable, they can have a range of brightness, beam angle and colour, and can be used to provide direct or indirect light.
Lamp intensity (or power density) is the overall power output of a lamp across the entire electromagnetic spectrum, generally expressed in Watts (W). This is not a measure of the brightness of the lamp, as some of a lamp’s output may be in non-visible parts of the electromagnetic spectrum.
Lamp brightness is expressed in lumen (lm). Illuminance is the level of light on a surface measured in lux (lx), where one lux is equal to one lumen per square metre (lm/m^2).
Lamp efficacy is the ratio of the light output to the power consumed, expressed in lumens per Watt (lm/W). Lamp efficiency is the proportion of electrical energy converted to light.
Lamp beam angle or beam spread is the angle of the cone of light emitted by reflectorised lamps, measured from the centre of the beam to the line where the intensity of the beam is 50% of the maximum.
Colour appearance refers to the visual sensation correlated with the ‘warmth’ or ‘coolness’ of the light emitted by a lamp.
[edit] Types of lamp
There are a wide variety of different types of lamp available:
[edit] Filament lamps
Filament lamps contain a tungsten wire (a filament) which is heated by an electrical current. Filament lamps may be incandescent lamps or halogen lamps.
[edit] Incandescent lamps
Incandescent lamps contain a filament within a vacuum-sealed glass bulb. The passage of electrical current through the filament causes it to glow.
[edit] Halogen lamps
Halogen lamps contain a coated filament surrounded by a halogen gas, which emits electrons when heated. They typically have a longer life and are more efficient than incandescent filament lamps.
In September 2018, the use of halogen lamps was banned across Europe. While remaining stocks are allowed to be sold, and low voltage incandescents used in oven lights will be exempt, the ban is intended to bring about a switch to light-emitting diodes (LEDs) which consume five times less energy than halogen lamps.
On 9 June 2021, the Government announced that the sale of most halogen light bulbs would be banned from 1 September 2021.
Ref https://www.gov.uk/government/news/end-of-halogen-light-bulbs-spells-brighter-and-cleaner-future
[edit] Extra-low voltage lamps
Extra-low voltage lamps are small halogen lamps producing two or three times the light output of conventional filament lamps. They are typically powered from a separate 12 V source and have increased efficiency and lamp life. As the heating effect is lower, they can be preferable for display lighting
[edit] Discharge lamps
Discharge lamps, sometimes referred to as arc discharge lamps, discharge an electric current through a gas or gas/metal vapour mix. Discharge lamps may be fluorescent lamps or High Intensity Discharge (HID) lamps.
[edit] Fluorescent lamps
Fluorescent lamps discharge an electric current through an inert gas and low pressure mercury vapour to produce ultraviolet (UV) energy. This generates ultraviolet radiation, which is converted into visible light by a phosphor coating on the inner face of the glass. The type of coating determines the spectrum of light emitted.
On 9 June 2021, the Government announced that the sale of most fluorescent lights would be banned from September 2023.
Ref https://www.gov.uk/government/news/end-of-halogen-light-bulbs-spells-brighter-and-cleaner-future
[edit] Compact fluorescent lamps (CFL)
Compact fluorescent lamps are small diameter, single ended fluorescent lamps, bent to form a compact shape. They may have bases allowing them to be used as replacements for incandescent lamps.
[edit] High intensity discharge lamps (HID)
High intensity discharge lamps are formed by compact arc tubes which enclose gas and metal salts. When the arc has formed, the metal salts evaporate, forming plasma which increases the intensity and reduces the power consumption of the arc. HIDs are typically mercury, metal halide (MH), ceramic metal halide (CMH) or high-pressure sodium (HPS).
[edit] Xenon Arc Lamps
Xenon arc lamps contain xenon gas and emit light that is very similar to sunlight.
[edit] Light-emitting diodes LED
LEDs contain solid semi-conductor materials that convert electrical impulses into light. They may include fluorescent materials that alter the colour of the light. They have a similar efficiency to CFLs but are longer lasting.
For more information see: LED lights.
[edit] Related articles on Designing Buildings
- Architectural LED market.
- Artificial lighting.
- Ballast or control gear.
- Colour.
- Colour appearance.
- Colour Rendering Index CRI.
- Dichroic reflector.
- Discharge lamp.
- Electromagnetic spectrum.
- Extra-low voltage lamps.
- General lighting v task lighting.
- Glare.
- Health and wellbeing impacts of natural and artificial lighting.
- Illuminance.
- Lamp efficacy.
- Lava lamp.
- LED lights.
- Light fitting.
- Lighting.
- Lighting and energy efficiency.
- Lighting and health infographic.
- Lighting energy numeric indicator LENI.
- Lighting of construction sites.
- Light Pollution - Human Health Impacts from LEDs.
- Luminaire efficacy.
- Luminous flux.
- Neon lighting.
- Power factor.
- Seeley Library.
- Space classifications for lighting controls.
- Specialist process lighting.
- The essential guide to retail lighting.
- The impact of lighting in retail design.
- Types of lighting.
Featured articles and news
The UK's Modern Industrial Strategy: A 10 year plan
Previous consultation criticism, current key elements and general support with some persisting reservations.
Building Safety Regulator reforms
New roles, new staff and a new fast track service pave the way for a single construction regulator.
Architectural Technologist CPDs and Communications
CIAT CPD… and how you can do it!
Cooling centres and cool spaces
Managing extreme heat in cities by directing the public to places for heat stress relief and water sources.
Winter gardens: A brief history and warm variations
Extending the season with glass in different forms and terms.
Restoring Great Yarmouth's Winter Gardens
Transforming one of the least sustainable constructions imaginable.
Construction Skills Mission Board launch sector drive
Newly formed government and industry collaboration set strategy for recruiting an additional 100,000 construction workers a year.
New Architects Code comes into effect in September 2025
ARB Architects Code of Conduct and Practice available with ongoing consultation regarding guidance.
Welsh Skills Body (Medr) launches ambitious plan
The new skills body brings together funding and regulation of tertiary education and research for the devolved nation.
Paul Gandy FCIOB announced as next CIOB President
Former Tilbury Douglas CEO takes helm.
UK Infrastructure: A 10 Year Strategy. In brief with reactions
With the National Infrastructure and Service Transformation Authority (NISTA).
Ebenezer Howard: inventor of the garden city. Book review.
The Grenfell Tower fire, eight years on
A time to pause and reflect as Dubai tower block fire reported just before anniversary.
Airtightness Topic Guide BSRIA TG 27/2025
Explaining the basics of airtightness, what it is, why it's important, when it's required and how it's carried out.
Construction contract awards hit lowest point of 2025
Plummeting for second consecutive month, intensifying concerns for housing and infrastructure goals.
Understanding Mental Health in the Built Environment 2025
Examining the state of mental health in construction, shedding light on levels of stress, anxiety and depression.
The benefits of engaging with insulation manufacturers
When considering ground floor constructions.
Lighting Industry endorses Blueprint for Electrification
The Lighting Industry Association fully supports the ECA Blueprint as a timely, urgent call to action.
Comments
[edit] To make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.