Pulse air tightness testing for buildings
Pulse air tightness testing for buildings is considered an alternative method to standard blower door test to measure the air tightness of a building. In June 2022 the published edition of the UK Approved Document L of the Building Regulations, for the first time included approval of an alternative method of airtightness testing to the traditional approach using a fan pressurisation system.
The pulse system approach measures the air leakage of a building at a near ambient pressure level of 4 Pascals (Pa) rather than the standard blower pressure of 50 Pascals (Pa), allowing for a portable compressed-air based unit. This lower pressure testing give an air leakage measurement representative of inhabited conditions of the buildings and simplifies the process of testing removing the need for block up doorways and fans to penetrate the building fabric, so less disruptive.
Whilst the system is approved by the buildings regulations for use in UK buildings industry responses to the Future Homes Standard consultation revealed that there was some lack of confidence in the method, when dealing with very airtight properties, and more generally in comparing the different testing methods. A study published in Energy and Buildings Volume 295 (15 September 2023, 113270) "An investigation into the efficacy of the pulse method of airtightness testing in new build and Passivhaus properties" (Harriet Seddon & Hua Zhong) However showed that when extrapolated up to 50 Pa all fell within the fan pressurisation’s 10% uncertainty range.
The technology was developed by The University of Nottingham, and is now commercially-licensed to tech start-up, Build Test Solutions (BTS), for further information visit https://www.buildtestsolutions.com.
[edit] Related articles on Designing Buildings
- Air change rates.
- Air infiltration.
- Air permeability in isolation rooms.
- Air permeability testing of isolation facilities.
- Air tightness in buildings.
- Approved documents.
- Building emission rate.
- BREEAM Testing and inspecting building fabric.
- Building services compliance with the building regulations.
- Domestic ventilation systems performance.
- Draughts in buildings.
- Dwelling emission rate.
- Dwelling type.
- Energy audit.
- Energy performance certificates.
- HVAC balancing.
- Infrared thermography.
- Let us evolve our buildings from being passive structures to interactive and reactive systems.
- Performance gap.
- Permeability.
- Pervious.
- Porous.
- Standard assessment procedure.
- Target emission rate.
- The history of non-domestic air tightness testing.
- Thermal imaging to improve energy efficiency in building design.
- Featured articles and news
- Energy Efficiency Taskforce disbanded after six months
- As energy efficiency regulations for landlords scrapped.
- Specifying third-party certification
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.