Hazardous substances
Many workplaces include hazardous substances (solids, liquids or gases) exposure to which can have negative affects on the body through contact with the skin, inhalation or ingestion. Exposure to hazardous substances can result in short or long term health effects. This includes serious health problems such as cancer, asthma and dermatitis.
Hazardous substances may include:
- Flowers, fruits, vegetables and bulbs, which can cause dermatitis.
- Working for prolonged periods with water and cleaning agents, which can cause dermatitis.
- Prolonged contact with wet cement which can lead to chemical burns or dermatitis.
- Dusty or fumy conditions which can cause lung diseases.
- Paint, glue, ink, lubricant, detergent and beauty products.
However, if the substances are used in the correct manner, potential ill health caused by them should be preventable.
There is a common law duty placed on all employers to protect employees and members of the public as well as general health and safety legislation that is applicable to employers and workplaces. There is also the specific legislation of the Control of Substances Hazardous to Health Regulations 2002 (COSHH).
Under this legislation, hazardous substances are classified as toxic, very toxic, corrosive, harmful or irritant. They include those substances that are allocated a Workplace Exposure Limit (WEL), large quantities of dust and certain biological agents that are used in the workplace.
See COSHH for more information.
Individuals that are at risk from hazardous substances include anyone who works with or is exposed to them. Individuals exposed for prolonged periods are generally more at risk than others. The groups of people that could have a higher risk of exposure to hazardous substances include:
- Bakery workers – The dust found in bakeries along with flour can result in irritation to the eyes and nose along with skin problems and asthma.
- Cleaners – Typical cleaning products can result in burns and skin irritations.
- Welders – Fumes from welding can cause damage to the lungs.
- Garage workers – Many products found within a garage including greases, solvents, oils and paints, along with exposure to exhaust fumes can damage health.
- Healthcare workers – Infections can be caused by exposure to biological agents.
Controls for sites where hazardous substances could be present and where development is proposed close to them include:
- Hazardous substances consent – required when certain quantities of hazardous substances are present.
- Consideration during the preparation of Local Plans.
- Appropriate consideration of development proposals near hazardous installations.
In England, a system of consents for hazardous substances is implemented through the Planning (Hazardous Substances) Act 1990 and through various regulations.
Further specific guidance on all aspects of hazardous substances and planning can be found on the Planning portal website.
NB Water for life and livelihoods, River basin management plans, Glossary, Published by the Environment Agency in 2016, defines hazardous substances as: ‘…any substance or group of substances that are toxic, persistent and liable to bio-accumulate. The Joint Agencies Groundwater Directive Advisory Group (JAGDAG) provide a mechanism for making UK wide determinations and compile a UK list of hazardous substances.’
See also: Dangerous substance.
[edit] Related articles on Designing Buildings
- Approved Document C.
- Construction dust.
- Construction health risks.
- Construction waste.
- Contaminated land.
- COSHH.
- Deleterious materials.
- Designing to reduce the chemical, biological and radiological vulnerability of new buildings (IP 7/15).
- Dangerous substance.
- Hazardous waste.
- Health and safety.
- Health and Safety Executive.
- Inspections focus on occupational lung disease.
- Personal protective equipment.
- Planning (Hazardous Substances) Act 1990.
- Pollution.
- Priority substances.
- Registration, evaluation, authorisation and restriction of chemicals REACH.
- Reporting accidents and injuries on construction sites.
- Risk assessment.
- Volatile organic compounds.
- Workplace exposure limits.
Featured articles and news
Do you take the lead in a circular construction economy?
Help us develop and expand this wiki as a resource for academia and industry alike.
Warm Homes Plan Workforce Taskforce
Risks of undermining UK’s energy transition due to lack of electrotechnical industry representation, says ECA.
Cost Optimal Domestic Electrification CODE
Modelling retrofits only on costs that directly impact the consumer: upfront cost of equipment, energy costs and maintenance costs.
The Warm Homes Plan details released
What's new and what is not, with industry reactions.
Could AI and VR cause an increase the value of heritage?
The Orange book: 2026 Amendment 4 to BS 7671:2018
ECA welcomes IET and BSI content sign off.
How neural technologies could transform the design future
Enhancing legacy parametric engines, offering novel ways to explore solutions and generate geometry.
Key AI related terms to be aware of
With explanations from the UK government and other bodies.
From QS to further education teacher
Applying real world skills with the next generation.
A guide on how children can use LEGO to mirror real engineering processes.
Data infrastructure for next-generation materials science
Research Data Express to automate data processing and create AI-ready datasets for materials research.
Wired for the Future with ECA; powering skills and progress
ECA South Wales Business Day 2025, a day to remember.
AI for the conservation professional
A level of sophistication previously reserved for science fiction.
Biomass harvested in cycles of less than ten years.
An interview with the new CIAT President
Usman Yaqub BSc (Hons) PCIAT MFPWS.
Cost benefit model report of building safety regime in Wales
Proposed policy option costs for design and construction stage of the new building safety regime in Wales.
Do you receive our free biweekly newsletter?
If not you can sign up to receive it in your mailbox here.






















