Crinkly tin
![]() |
The roof of this small building made of old shipping containers is clad with a sinusoidal profile steel sheet. |
[edit] Introduction
‘Crinkly tin’ refers to sheets of profiled steel that are used for roofing and cladding buildings, mostly in industrial and other applications. The term is actually a misnomer as the sheeting is generally not made of tin. Today, the material mostly goes under the name of ‘profiled sheeting’, but may also be referred to as ‘wiggly’ or ‘wriggly’ tin, ‘corrugated iron’ or ‘galvanised sheets’.
Invented in 1829 as corrugated iron sheeting, the material was used in the late nineteenth century for building pre-fabricated buildings that were transported throughout the British Empire. It also became popular for agricultural sheds. Architects eventually found the material to be functional, durable, relatively economic, fast to install and with a potentially attractive ribbed texture and thus it came to be applied to numerous more permanent building types
Today, ‘crinkly tin’ is mainly made from galvanised or plastic-coated steel and is applied to elevations and roofs on a range of buildings that include warehouses, agricultural sheds, retail and industrial units, colleges and hospitals.
Specifiers can choose from a plethora of sheet types that are differentiated by their profile e.g trapezoidal or sinusoidal, pitch, thickness and colour. Sheets are also available that emulate roof tiles and pantiles at a fraction of the cost.
Generally used as a single skin, sheets for roofs are typically 0.7mm gauge and for walls 0.5mm gauge. Due to its thermal properties, condensation may occur either behind or below the sheeting. To avoid this, construction may incorporate insulation and vapour barriers.
[edit] Potential problems
It is common for steel sheeting to be coated with a very thin plastic layer to give protection against corrosion. However, this coating may be compromised on site when the material is cut to size, as the freshly cut edge will have no coating. The result is corrosion at the bare steel edge, and this will be exacerbated by rain and pollutants. Once corrosion starts, it can spread from the edges to other areas. Cut-edge corrosion is typically found at the eaves and sheet overlaps.
Corrosion may also occur when the metal expands in hot weather as the plastic coating may detach and allow water to penetrate. The ensuing corrosion may cause leaks and even perforation of the metal.
[edit] Related articles on Designing Buildings
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.