Swale
Photo credit: EX22218 - ON/OFF on Visualhunt.com / CC BY-NC-ND |
[edit] Introduction
Swales are natural or man-made linear depressions (or ditches), usually grass covered, with shallow-sloping sides. They are becoming more common as components in the drainage strategies of residential, commercial and municipal schemes.
Approved Document H - Drainage and Waste Disposal, describes ‘swales’ as:
‘…grass-lined channels which transport rainwater from a site as well as controlling flow and quality of surface runoff. Some of the flow infiltrates into the ground. There may be an overflow at the end into another form of infiltration device or a watercourse. They are particularly suitable for treatment of runoff from small residential developments, parking areas and roads.’
Their function is to:
- Slow the movement of water through the landscape after heavy rainfall;
- Reduce peak flows;
- Form a temporary reservoir;
- Direct water to a storage or discharge system and
- Facilitate the absorption of water into the ground.
Swales are frequently located alongside road verges, near the source of water run-off and can form a network linking storage ponds and wetlands. They can offer an efficient way of capturing rainwater and may form part of a sustainable urban drainage system (SuDS).
They can be both sustainable and economic because they are relatively easy to construct and can obviate the need for costly kerbs, gullies and gratings, as well as requiring little maintenance, other than mowing during the growing season. A grass length of around 150mm is considered optimal. Furthermore, swales can form good habitats for toads, newts and other amphibians which might have lower survival rates in conventional manufactured gullies.
[edit] How they work
In dry weather, a swale will hold little or no water. After a period of heavy rainfall, water will flow into the swale but its flow will be slowed by the grass which also filters out sediments and organic matter that remain on the top surface to be broken down naturally. Optimum performance usually relies on shallow slopes – both along the swale and on its sides. This may be further enhanced by installing check dams across the direction of flow; this will reduce the flow rate and lower the erosion risk.
A swale’s regulating function is enhanced by the processes of evaporation, infiltration into the surrounding soil and transpiration. If periods of exceptionally heavy rain are anticipated, overflows can be created to link to watercourses, storage ponds or wetlands.
Swales may recharge an underlying aquifer but if this is undesirable, an impermeable lining can be installed beneath the swale.
NB Trees in Hard Landscapes, A Guide for Delivery, published by the Trees and Design Action Group in September 2014, defines a swale as: ‘…a shallow vegetated channel designed to partially treat water quality, attenuate flooding potential and convey surface water runoff away from critical infrastructure.’
[edit] Related articles on Designing Buildings Wiki
- Are sustainable urban drainage systems the response to our changing climate?
- Bioretention system.
- Berm.
- Bund.
- Catchment flood management plans.
- Culvert.
- Detention pond.
- Drainage.
- Eutrophication.
- Rainwater harvesting.
- River engineering.
- Safe working in drains and sewers.
- Soakaway.
- SuDS infographic.
- SuDS - is there light at the end of the tunnel?
- Surface water
- Sustainable urban drainage systems SUDS.
- Water Act 2014.
- Water consumption.
- Water engineering.
Featured articles and news
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.
Conservation in the age of the fourth (digital) industrial revolution.
Shaping the future of heritage
Embracing the evolution of economic thinking.
Ministers to unleash biggest building boom in half a century
50 major infrastructure projects, 5 billion for housing and 1.5 million homes.
RIBA Principal Designer Practice Note published
With key descriptions, best practice examples and FAQs, with supporting template resources.
Electrical businesses brace for project delays in 2025
BEB survey reveals over half worried about impact of delays.
Accelerating the remediation of buildings with unsafe cladding in England
The government publishes its Remediation Acceleration Plan.
Airtightness in raised access plenum floors
New testing guidance from BSRIA out now.