Exterior wall
Contents |
[edit] Introduction
An exterior wall typically forms part of a building envelope, separating the accommodation inside from that outside. Its functions include:
- Environmental control – mediating between indoor and outdoor conditions.
- Security.
- Privacy.
- Fire control.
- Aesthetics.
It may include openings allowing access and ventilation and glazing to allow light in and views out. In loadbearing construction such as masonry, the exterior wall may also provide support to the combined dead, imposed and wind loads of the roof and floor construction and convey them to the foundations.
In a framed structure, the external walls may be non-loadbearing and are therefore relieved of any upper floor and roof loadings. However, they are normally self-supporting and are designed to resist wind loads, prevent the spread of fire and accommodate thermal movements.
Joints accommodating thermal movements may be required if long, uninterrupted wall lengths are involved.
[edit] Materials
Exterior walls can be made from a wide variety of materials either singly or in combination with other materials. These can include:
- Masonry such as stone, brick and block.
- Concrete.
- Timber.
- Metal cladding.
- Glass, metal or timber panels.
- GRP/GRC cladding.
- Terracotta.
For more information see: Types of wall and Cladding.
[edit] Construction systems used to build exterior walls
Various construction systems can be used to build external walls, including:
- Loadbearing – using stone, bricks and blocks, or reinforced concrete. Timber is used for log cabin construction.
- Framed – the exterior wall can be located around the structure, inside (thereby exposing the structure) or as infill panels located within the depth of the frame itself. Irrespective of the plane it is in, the exterior wall in these situations is usually referred to as ‘cladding’. These types of exterior wall wrap around the building’s structure, are typically non-loadbearing and serve as an aesthetic and climatic component. Tied back to the structure, they can be made of facing bricks, concrete blocks, timber panels, glass, plastic and other lightweight materials. For more information see: Cladding.
- Rainscreen – a thin façade made of metal, terracotta or other panel type is attached to a lightweight frame which is itself bolted to the building structure. In appearance, it is not usually possible to tell that the result is a façade of relatively little thickness. There is usually a ventilation gap between the back of the facing panel and the face (or inner wall) of the building. Rainscreens provide an opportunity to retrofit insulation to existing buildings. For more information see: Rainscreen.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.