- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 03 Jan 2017
State Route 520 Floating Bridge
In March 2016, Washington State in northwest America officially opened the world’s longest floating bridge. The ‘State Route 520 Bridge’ (SR520), as it is known, is a six-lane pontoon structure 2.4 km in length. It was constructed as part of the ‘Connecting Washington’ package of measures, Washington State’s largest and greenest transportation investment.
It replaced a four-lane bridge that was completed in the early-1960s. The bridge boasts bigger and stronger pontoons and anchors than the previous bridge, along with a stormwater collection and treatment system to help improve the water quality of Lake Washington. A bus and carpool lane flows in either direction, as well as a 14 ft-wide bicycle and pedestrian path.
Floating bridges are constructed on large water-tight concrete pontoons rigidly connected end-to-end, upon which the road deck is constructed. Individual bridge pontoons are built on the land before being floated and towed to the bridge site. Once there, they are connected at each end to grounded approach structures, starting at the edge of the floating structure and then pieced together towards the bridge’s centre. Enormous cables hundreds of feet long hold the pontoons in place, connected to anchors buried deep in the lake bed.
A more conventional suspension bridge was not suitable for the location as the deepest point of Lake Washington is 214 ft, meaning that the bridge’s support towers would have to be approximately 630 ft tall, nearly the same height as the Space Needle.
The use of floating bridges is typically limited by the wind and wave forces that are likely to be experienced. The ‘fetch’ is the unobstructed clear distance over the water that wind can travel to the bridge. The longer the fetch, the higher the wind and wave forces will be. Pontoons bend, heave and twist as a result of wind and wave forces, creating large stresses in the pontoons and anchor system. However, even in the event of a ‘100-year storm’ (a storm that statistically has 1% chance of occurring in any given year), the pontoons are designed so that they will not crack, and so the bridge will not sink.
 Find out more
 Related articles on Designing Buildings Wiki
- 7 Engineering Wonders of the World.
- Akashi Kaikyo Bridge.
- Bridge construction.
- Bridges of the world.
- Civil engineer.
- Driven piles.
- Illusionist bridge.
- Lucky Knot Bridge.
- Nine Elms to Pimlico bridge.
- Pile foundations.
- Queensferry Crossing.
- River engineering.
- Thames barrier.
- The Iron Bridge.
- The Millau Viaduct.
- Water engineering.
 External references
- Washington State - Bridge facts
Featured articles and news
ICE responds to a transport consultation advising the government to make decisions enabling more inclusive cities.
BRE and Loughborough University complete first phase refurbishment of demonstration home.
How the risk of collapse of fibrous plaster ceilings is being addressed in theatres.
If you’re a great writer and have practical experience of the construction industry, it could be you.
Frustrated by long documents or technical jargon? Put off by sign-up forms or costs? Take this 5 min survey to help improve construction knowledge.
These are attached to land that is the subject of a planning permission, and used to compensate for negative impacts.
ICE Scotland launch its new report for a long-term, holistic approach to infrastructure planning and funding.
Building surveys provide a detailed evaluation of a property's condition and involve an extensive inspection.
Government announces additional £2m funding for councils to tackle rogue landlords.
Maintenance is the process of ensuring that buildings retain a good appearance and operate at optimum efficiency.
Andrew Wyllie CBE, the CEO of Costain, becomes the 154th ICE President.