Bituminous mixing and laying plant
Contents |
[edit] Introduction
The mixing and laying of bitumen for roads and pavements can be undertaken using a range of different types of plant. The type of plant used will be determined by the type of material that is required and the process adopted.
[edit] Heaters and boilers
Bitumen heaters and boilers range from small mobile units to large permanent plant. The most common types are:
- Mobile boilers: Mounted on a steel chassis and towed from place to place. The furnace at the base of the boiler is either gas or oil-fired.
- Static heating and storage tanks: These are heated by oil-fired burners and are available for high outputs as they can have capacities of up to 18,000 litres. They will usually be transported on a low loader.
[edit] Binder distributors
The most common type of binder distributor is the bulk tank sprayer. The binder is kept at the required temperature by fitted heating units. A static heating unit feeds the binder into the bulk tanker which can have a range of tank capacities. A horizontal spray bar and power-driven pump mounted at the rear of the unit is used to spray the binder over the road surface.
[edit] High speed road-surfacing units
These are commonly used in resurfacing projects. The road is sprayed with hot binder and then coated with grit from a slow-moving machine. A lorry follows behind the chip-spreader to keep it supplied with chippings. These are fed into a rear hopper and carried on a conveyor to the spreader.
[edit] Road planers and heaters
Road planers heat the bituminous road surface until soft and then make it even by using revolving blades. The blades cut away to leave a smooth surface that can then be treated as required.
Road heaters are used on road surfaces that have become too smooth. They dry, heat and burn the road surface to enable further treatment as required.
[edit] Asphalt and bitumen mixing plant
These are either permanent plant installations or small mobile units. They perform a complete sequence of operations, from drying, to aggregate heating and mixing, to coating them with binder, to delivering them ready to be laid.
- Drying units: A long rotating cylindrical drum is heated internally by hot gases through which the aggregate is passed, ensuring that it is thoroughly dry before being coated with a binder.
- Batch-mixing plants: These have several individual sections – aggregate feeder, drier unit, binder heater, weighing plant and mechanical mixer.
- Mixing units: These are a form of paddle mixer that enables a thorough mix in a short space of time.
[edit] Spreading and finishing plant
Large machines are used for spreading and finishing the surface coating, ideally in a single pass. They are available with different laying speeds and hopper capacities. Rollers on the front of the lorry’s hopper are connected to the tyres and so push the lorry forward whilst unloading. The screed plate is hydraulically adjusted so as to control the thickness of the surface finish.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
- Code of Practice for Ironwork Systems Installation and Refurbishment.
- Compressed air plant.
- Concreting plant.
- Construction plant.
- Construction tools.
- Crane supports.
- Earth-moving plant.
- Excavating plant.
- Forklift truck.
- Hoist.
- Kerbs.
- Pavement.
- Power float.
- Road construction.
- Road joints.
- Runway construction.
- Scaffolding.
- Stacker.
- Types of crane.
- Types of road and street.
- Types of roller.
[edit] External references
- ‘Introduction to Civil Engineering Construction’ (3rd ed.), HOLMES, R., The College of Estate Management, (1995)
Featured articles and news
C20 Society; Buildings at Risk List 2025
10 more buildings published with updates on the past decade of buildings featured.
Boiler Upgrade Scheme and certifications consultation
Summary of government consultation, closing 11 June 2025.
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
From project managers to rising stars, sustainability pioneers and more.
Places of Worship in Britain and Ireland, 1929-1990. Book review.
The emancipation of women in art.
Call for independent National Grenfell oversight mechanism
MHCLG share findings of Building Safety Inquiry in letter to Secretary of State and Minister for Building Safety.
The Architectural Technology Awards
AT Awards now open for this the sixth decade of CIAT.
50th Golden anniversary ECA Edmundson awards
Deadline for submissions Friday 30 May 2025.
The benefits of precast, off-site foundation systems
Top ten benefits of this notable innovation.
Encouraging individuals to take action saving water at home, work, and in their communities.
Takes a community to support mental health and wellbeing
The why of becoming a Mental Health Instructor explained.
Mental health awareness week 13-18 May
The theme is communities, they can provide a sense of belonging, safety, support in hard times, and a sense purpose.
Mental health support on the rise but workers still struggling
CIOB Understanding Mental Health in the Built Environment 2025 shows.
Design and construction material libraries
Material, sample, product or detail libraries a key component of any architectural design practice.
Comments
I think I like this article because it summarizes into details and its points are clear and how I wish you explained how Bitumen laying operation is done. The information will be so much useful.