Conoid shell
A conoid is a special kind of warped ruled surface which, as a curved shell roof, can be used as an alternative to a barrel vault. The basic principle is that one edge of the shell is curved while the opposite edge is kept straight. In architecture, this is referred to as a ‘right conoid’.
Two basic geometrical forms are encountered:
- A straight line is moved along a curved line at one end and a straight line at the other end, the resultant shape being cut to the required length.
- A straight line is moved along a curved line at one end and a different curved line at the other end.
The end consists of a reinforced concrete or steel lattice, which serves as a stiffening beam to prevent shell deformation. Support is required at all corners.
Spans of up to 12 m with chord lengths of up to 24 m are possible. The typical chord-to-span ratio is 2:1.
When conoids are made of reinforced concrete they require formwork on which to set the reinforcing steel and pour the concrete. The initial cost of making the formwork is usually high, but it can be reduced by pouring many shells on the same form.
There can be a solid infill or glazed end diaphragm. Glass panes set between adjacent conoids at the curved front of each conoid can allow for illumination. If the conoids face north they get the best natural light, which can be important for space such as factories.
Conoid shells are an ideal shape for cantilevered roofs covering the stands of stadiums with either a curvature up or a curvature down.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
- Anticlastic.
- Barrel vault.
- Cantilever.
- Folded plate construction.
- Hyperbolic paraboloid.
- Long span roof.
- Megastructure.
- Pendentive dome.
- Portal frame.
- Shell roof.
- Suspended ceiling.
- Synclastic.
- Tensile structures.
- Types of ceiling.
- Types of dome.
- The history of fabric structures.
[edit] External references
- ‘Building Construction Handbook’ (6th ed.), CHUDLEY, R., GREENO, R., Butterworth-Heinemann (2007)
- ‘The story of a right wavelet conoid’ , J. Dolezal (2011)
Synclastic.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Your views needed - a strategy for the professions, trades and occupations.
Confronting competency, codes, capacity and costs.
The hidden risk in modern construction supply chains.
Construction Management, 10 June
24 months to 14: CITB launches accelerated apprenticeships.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.
Construction Management, 10 June.
Heat pumps beat boilers in new home tests.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.

















