Penetrating damp in buildings
Damp in buildings may be apparent from:
- Damp patches...
- Mould growth, which is a cause of respiratory allergies.
- Mildew, salts, staining and ‘tide marks’.
- Damage to surface finishes.
- Corrosion and decay of the building fabric.
- Slip hazards.
- Frost damage.
- Poor performance of insulation.
- Damage to equipment, or electrical failure.
The most common causes of persistent damp in buildings are:
Penetrating damp is moisture that penetrates laterally through the fabric of a building from the outside, typically as a result of; leaking roofs or pipework, blocked or damaged guttering, cracks in walls, and so on.
Penetrating damp is most common high on south-west facing walls that are exposed to driving rain. It is particularly common in older buildings which do not have a cavity in the external wall construction. Properly constructed cavity walls should drain penetrating water back to the outside through ‘weep holes’. However, penetrating damp can occur in cavity wall constructions where insulation has not been properly installed, where cavities include obstructions, where cavities have been incorrectly filled or where wall ties have been incorrectly installed.
Damp can often be seen visually, but diagnosing the cause can be difficult and can involve specialist advise and equipment, such as; electrical resistance meters (although the presence of salts will affect resistance as well as damp – see Rising damp for more information), carbide meters, thermal imaging cameras, and so on.
It is only when the source has been identified that the problem can be tackled. This may be as simple as repairing damaged items, such as; damage to flashing, missing or broken slates or tiles, damaged pipework, cracks in walls, old or damaged sealants, damage to chimneys, parapets and other parts of the building that are difficult to see, deteriorating pointing and so on. However, where problems are concealed, such as incorrectly constructed cavities, they can be very difficult and disruptive to rectify.
There are a number of external treatments available to prevent penetrating damp, such as cladding external walls and the use of colourless water-repellent treatments. However, this may just conceal the problem, and increasing the impermeability of external walls could increase the likelihood of surface condensation inside the building or interstitial condensation within the structure itself.
Breathable treatments are available, but again, it is important that the source of the problem is tackled.
Treatment generally also involves remedial work to any corroded or decayed elements of the building fabric, such as hacking off and replacing existing plaster, replacing timbers, re-decoration, and so on.
NB Guidance on the code of practice for property flood resilience, published by CIRIA in 2021, defines water ingress as: ‘The seepage or entry of water into an area it should not be in.’
See also: Leaks in buildings.
[edit] Related articles on Designing Buildings Wiki
- Assessing moisture in porous building materials.
- Breather membrane.
- Building damp-free cavity walls.
- Carbide meter.
- Cold bridge.
- Condensation.
- Damp.
- Damp-proof course.
- Damp proofing.
- Defects in brickwork
- Defects in stonework.
- Dew point.
- Diagnosing the causes of dampness (GR 5 revised).
- Does damp proofing work?
- Efflorescence.
- Flashing.
- Humidity.
- Insulation.
- Interstitial condensation.
- Leaks in buildings.
- Mould growth.
- Rising damp.
- Rising damp in walls - diagnosis and treatment (DG 245).
- Spalling.
- Tanking.
- Treating brickwork with sealant or water repellent.
- Understanding dampness.
- Weathertight.
Featured articles and news
Boiler Upgrade Scheme and certifications consultation
Summary of government consultation which closes 11 June 2025.
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
From project managers to rising stars, sustainability pioneers and more.
Places of Worship in Britain and Ireland, 1929-1990. Book review.
The emancipation of women in art.
Call for independent National Grenfell oversight mechanism
MHCLG share findings of Building Safety Inquiry in letter to Secretary of State and Minister for Building Safety.
The Architectural Technology Awards
AT Awards now open for this the sixth decade of CIAT.
50th Golden anniversary ECA Edmundson awards
Deadline for submissions Friday 30 May 2025.
The benefits of precast, off-site foundation systems
Top ten benefits of this notable innovation.
Encouraging individuals to take action saving water at home, work, and in their communities.
Takes a community to support mental health and wellbeing
The why of becoming a Mental Health Instructor explained.
Mental health awareness week 13-18 May
The theme is communities, they can provide a sense of belonging, safety, support in hard times, and a sense purpose.
Mental health support on the rise but workers still struggling
CIOB Understanding Mental Health in the Built Environment 2025 shows.
Design and construction material libraries
Material, sample, product or detail libraries a key component of any architectural design practice.
Construction Products Reform Green Paper and Consultation
Still time to respond as consultation closes on 21 May 2025.
Resilient façade systems for smog reduction in Shanghai
A technical approach using computer simulation and analysis of solar radiation, wind patterns, and ventilation.