Last edited 17 Nov 2026

How building product manufacturers get specified

Contents

[edit] Introduction

Specification is the process by which a construction product, or a performance requirement it must meet, is written into the project documents for a building. For building product manufacturers, being specified is one of the most important routes to market. A product named in a specification is more likely to be bought for that project, and to be used on similar projects by the same design team.

Specification usually develops over several months, through research, comparison and discussion. Manufacturers that only engage at the point of purchase often find the key decisions have already been made.

[edit] Who specifies construction products

Depending on the project and procurement route, products may be specified by:

[edit] Types of specification

A prescriptive (or proprietary) specification names a particular manufacturer and product. A performance specification sets out what the product must achieve, such as a fire classification, thermal performance or durability, and leaves the choice of product open. Many specifications combine the two, naming a product but allowing an alternative that meets the same requirements.

In the UK, many specifications are written using NBS systems, and manufacturers can list product information on platforms such as NBS Source.

[edit] Stages in the specification process

The route to specification typically has four stages:

  1. Discovery. The designer looks for a solution to a design problem, through online search, product libraries, trade press, colleagues and, increasingly, AI tools.
  2. Evaluation. A shortlist is compared on performance, compliance, certification, sustainability data, availability and cost.
  3. Specification. A product or performance requirement is written into the specification.
  4. Procurement and installation. The contractor, merchant and installer source the product. At this stage, specified products can be substituted with alternatives, often as part of value engineering.

[edit] What specifiers need from manufacturers

Specifiers generally need product information that is complete, accurate and easy to find. This typically includes:

Research by NBS has found gaps in what manufacturers provide. In its What Specifiers Want research, 43% of construction professionals said it isn't easy to find comprehensive detail about the safety performance of products, and 86% said EPDs are an important part of their decision-making.

[edit] Referrals and specification activity

Many manufacturers rely on referrals from contractors, merchants and existing customers. In a 2026 NBS survey of UK construction product manufacturers, 85% said they target architects and specifiers, but 72% said referrals are their primary source of leads. NBS noted that referrals are reactive, and that manufacturers who are not visible earlier in the specification process may miss opportunities.

[edit] The role of AI search

Designers are increasingly using AI tools in their work. RIBA's 2026 AI report found that 74% of UK architecture practices use AI, up from 59% in 2025 and 41% in 2024.

AI tools that answer product questions draw on published information, such as manufacturers' websites, product libraries, trade press articles and certification listings. Product information that is clear, consistent across all sources and confirmed by independent sources is more likely to be used in those answers.

[edit] Protecting a specification

A specification only results in a sale if the product is installed. Substitution can happen when a contractor or merchant proposes a cheaper alternative described as equivalent.

Manufacturers can reduce this risk by giving contractors and merchants clear comparison information, installation guidance and evidence of performance. On higher-risk buildings, the regime introduced by the Building Safety Act 2022 places greater scrutiny on changes to specified products, which makes accurate product information more important for everyone involved.

[edit] Measuring specification activity

Manufacturers may measure progress towards specification through:


This article was written by John Wood of Dragonfly PR, an award-winning construction marketing agency based in Sheffield that works with building product manufacturers and construction businesses.

[edit] Related articles on Designing Buildings

[edit] References

[edit] Sources

Designing Buildings Anywhere

Get the Firefox add-on to access 20,000 definitions direct from any website

Find out more Accept cookies and
don't show me this again