Fly ash
Contents |
[edit] Introduction
Fly ash is a general term given to the lighter fine ash that is produced during the combustion of any material in a furnace or incinerator, it can be around 5-10% of the mass of the material being burnt. The density of this lighter fly ash called fly ash because it is kept in suspension during combustion and normally accumulates on the sides of chimney flues. The other ash that is produced is known as the main ash or bottom ash, this is a heavier ash that falls to the base of the incinerator. Fly ash is also commonly associated more directly with the combustion of coal as described here.
Fly ash (or flue ash or pulverised flue ash PFA) is a by-product of the coal combustion process, particularly in electricity generating power stations. It is formed when fine particulates of burned coal fuse in suspension and are driven out with flue gases. As they are driven out of the combustion chamber, the fused material cools and forms glassy particles called fly ash. Modern coal-fired power plants use particle filtration equipment to catch the fly ash before it reaches the chimneys.
(NB: Coal ash is the term given to the mixture of fly ash (which rises) and the bottom ash which falls to the bottom of the boiler).
[edit] Composition
The chemical components of fly ash will depend on the type of coal being burnt and its origin. Typically, if the coal derives from coal-bearing rock strata, the fly ash will include substantial quantities of silicon dioxide (SiO2), aluminium oxide (Al2O3) and calcium oxide (CaO). Other constituents may be present as trace quantities and may include (alphabetical order) arsenic, beryllium, boron, lead, mercury, thallium and vanadium – to name a few. In appearance similar to Portland cement, fly ash is a fine powder with particles that are largely spherical-shaped, ranging in size from 0.5µm to 300 µm.
Before the advent of modern air pollution control standards, much of the smog and air pollution in early to mid-20th century European cities was partly the result of releasing unfiltered fly ash directly into the atmosphere.
Fortunately, environmental and health legislation has reduced the emissions to less than 1% of the fly ash produced. Modern filtration processes may use mechanical collectors (such as dust cyclones that rely on vortex separation); electrostatic precipitators or filter bags. This has resulted in huge quantities of fly ash that must be disposed of: today, around 65% of the global fly ash production is sent to landfill. This has increased landfill costs globally which has led to more efforts to find recycling uses.
[edit] Classes of fly ash
There are two classes of fly ash:
- Class F (high calcium) largely produced by burning bituminous or anthracite coals. Pozzolanic in nature.
- Class C (low calcium) largely from burning sub-bituminous or lignite coal.
[edit] Applications
One of the largest consumers of fly ash is the production of concrete, where it is used as a substitute for Portland cement. Other uses include as a constituent in:
- Concrete block paving and other concrete products, such as pipes.
- Clay brick production.
- Blended cements.
- Mineral filler for asphalt roads.
- Soil stabilisation.
- Structural fill.
- Waste stabilisation and treatment.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Quick summary by size, shape, test, material, use or bonding..