Working in confined conditions
Contents |
[edit] Introduction
A confined space is a space that is substantially enclosed, may have limited or restricted means of entry or exit, and poses a health hazard both from its spatially restricted nature and the access to and from it, or from the materials and objects that may be encountered. It hinders and potentially makes unsafe the activities of those inside. Confined spaces are not usually intended for continuous occupation.
Ship building, water, construction and mining industries may required work in confined spaces.
[edit] Types of confined space
Spaces that may be considered confined spaces include:
- Low headroom basements.
- Crawl spaces.
- Catwalks, gantries and arbour pits.
- Lift and escalator pits.
- Attics and lofts.
- Tanks.
- Manholes.
- Storage bins.
- Pipelines.
- Vaults.
- Open ditches.
Hazards that may be encountered in confined spaces can include:
- Poor air quality or insufficient oxygen for an entrant to breathe, or inhalation of stale or polluted air.
- Materials that could engulf a worker e.g a liquid or flowable solid substance.
- Total darkness.
- Atmospheric hazards, e.g flammable gas, airborne combustible/non-combustible gas.
- Entrapment hazards.
- Low bulkheads or very low ceiling heights that could cause head injuries.
- Sloping floors that could cause a slip.
- Walls that converge inward to a smaller cross-section.
- Very hot, unguarded heating or water pipes.
- Exposed live wires.
- Unguarded machinery.
- Chemical exposure.
- Rodents.
[edit] Confinement
If a confined space is so configured that it presents an entrapment hazard to entrants, they should be made aware of the fact prior to entering and should be required to have a permit to enter. They should also receive training to ensure they are aware of, and can deal with, the potential dangers. Pre-existing health problems should be identified or disclosed beforehand e.g workers who suffer from claustrophobia should not be allowed access to crawl spaces.
[edit] Legislation
The Health and Safety at Work etc Act 1974 renders employers responsible for ensuring the safety of their employees and others. This is reinforced by:
- The Confined Spaces Regulations 1997 which apply where the assessment identifies risks of serious injury from work in confined spaces. Critically, it mandates that entry to confined spaces should be avoided if the work can be undertaken another way, e.g by doing the work from the outside. But if unavoidable, a safe system of working should be chosen and adequate emergency measures should be in place before the work begins.
- The Management of Health and Safety at Work Regulations 1999. Under the MHSW Regulations, employers and self-employed people should carry out suitable and sufficient assessment of the risks for all work activities for the purpose of deciding what measures are necessary for safety. For confined spaces, this means identifying the hazards present, assessing the risks and determining what precautions to take.
[edit] Training
Training will be required if workers are likely to have to work in confined spaces. The overall training objective is to protect those entering or working in or around a confined space. Such courses should teach the physical, chemical, and biological principles related to safe working within confined spaces. Potential entrants should be taught exactly what constitutes a confined space and the potential hazards they may encounter.
[edit] Related articles on Designing Buildings Wiki
- Arbour.
- Asbestos.
- CDM.
- CDM Regulations.
- COSHH.
- Deleterious materials.
- Fire and rescue service.
- Gas Safe.
- Health and safety.
- Health and safety file.
- Health and safety inspector.
- Notify HSE.
- Occupational health.
- Reporting accidents and injuries on construction sites.
- Risk assessment under The Regulatory Reform (Fire Safety) Order 2005.
- Safety.
[edit] External resources
Featured articles and news
Do you take the lead in a circular construction economy?
Help us develop and expand this wiki as a resource for academia and industry alike.
Warm Homes Plan Workforce Taskforce
Risks of undermining UK’s energy transition due to lack of electrotechnical industry representation, says ECA.
Cost Optimal Domestic Electrification CODE
Modelling retrofits only on costs that directly impact the consumer: upfront cost of equipment, energy costs and maintenance costs.
The Warm Homes Plan details released
What's new and what is not, with industry reactions.
Could AI and VR cause an increase the value of heritage?
The Orange book: 2026 Amendment 4 to BS 7671:2018
ECA welcomes IET and BSI content sign off.
How neural technologies could transform the design future
Enhancing legacy parametric engines, offering novel ways to explore solutions and generate geometry.
Key AI related terms to be aware of
With explanations from the UK government and other bodies.
From QS to further education teacher
Applying real world skills with the next generation.
A guide on how children can use LEGO to mirror real engineering processes.
Data infrastructure for next-generation materials science
Research Data Express to automate data processing and create AI-ready datasets for materials research.
Wired for the Future with ECA; powering skills and progress
ECA South Wales Business Day 2025, a day to remember.
AI for the conservation professional
A level of sophistication previously reserved for science fiction.
Biomass harvested in cycles of less than ten years.
An interview with the new CIAT President
Usman Yaqub BSc (Hons) PCIAT MFPWS.
Cost benefit model report of building safety regime in Wales
Proposed policy option costs for design and construction stage of the new building safety regime in Wales.
Do you receive our free biweekly newsletter?
If not you can sign up to receive it in your mailbox here.























