Polypropylene in the construction industry
Contents |
[edit] Introduction
Polypropylene (PP, also known as polypropene or polymerised propene) is a type of thermoplastic polymer resin that has similar qualities to polyethylene (PE) but is slightly harder and has better resistance to heat and organic solvents. After PE, polypropylene is the second-most widely produced commodity plastic with a global market (2013) of around 55 million tonnes.
A member of the polyolefin family of resins, PP can be injection moulded and extruded into many shapes and products such as cups, cutlery, containers, housewares and car parts e.g batteries. It is also spun into fibres for inclusion in industrial and domestic textiles, including for clothing.
As a plastic it is extremely versatile and found in common household items and used in both commercial and industrial applications.
[edit] Properties
- Lightweight, tough and flexible
- Heat resistant (high melting point (around 160°C) – used in microwaves, dishwashers, food containers
- Chemically inert
- Impact and freeze-resistant
- High shatter resistance
- Low moisture absorption
- Mould resistant
- Low density allows lower-weight mouldings to be made
- Resistant to fats and organic solvents
- Accepts colour and dye without degrading
- Reasonably inexpensive
- Does not contain BPA (bisphenol A - which some claim can leach into food products)
- Fatigue resistance – allows use as a plastic hinge
- It can float in water
[edit] Typical applications
It has a large number of end-use applications in the construction industry due to the wide range of grades available and the use of additives to modify properties:
- PP fibres are added to concrete to increase strength and reduce cracking and spalling
- Non-woven fabrics for ground stabilisation
- Roofing membranes (waterproofing top-layer in single-ply systems)
- Reinforcement in construction and road paving
- Electrical cable insulation (alternative to PVC)
- Piping systems
- Carpets, rugs and upholstery
- Medical and laboratory equipment
- Reusable containers
- Plastic machine parts
- Industrial rope and cordage
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.