Thermal conduction in buildings
Thermal conduction is the diffusion of internal heat within a static (rather than fluid) body as a result of a temperature difference across it. Heat will tend to diffuse from higher temperature parts of a body to lower temperature parts.
This is particularly important in buildings where there may be a temperature difference between the inside and outside, for example, in a heated building during the winter, or in a cooled building during the summer.
Conduction is one of the main potential heat transfer mechanisms by which the internal heating or cooling can be lost to the outside, resulting in high operating costs, high carbon emissions and occupant discomfort.
Simple conductive heat transfer (in watts) through a uniform body can be calculated from Fourier's Law:
q = k A dT / s
Where:
- A is the area of the body (m2)
- k is the body's thermal conductivity (W/m°C)
- dT is the temperature difference across the body (°C)
- s is the body's thickness (m)
To determine the heat transfer between the inside and outside of a building component, it may be necessary to calculate the conductive heat transfer across a number of layers, and the internal and external surface resistances. This is sometimes calculated using a U-Value. In simple terms, the lower the U-value of an element of a building's fabric, the less heat will transmit across it. U-values are expressed in watts per square metre per degree Kelvin (W/m2K).
It is sometimes thought that conductivity is described by the U-Value, however, U-values include inside and outside surface thermal resistances. Conductivity is more accurately expressed by a material's R-Value, which is the reciprocal of its thermal resistance and does not include a surface component. See U-Value for more information.
Conductive heat transfer is particularly high across narrow, highly conductive components such as windows. It can be inhibited by insulating materials which have a high thermal resistance. See insulation for more information. Typically conductive heat transfer is reduced by creating breaks in the continuity of a material, such as the air (or other gas) in insulation, or the air or gas filled space between the panes of glass in double or triple glazing. This breaks the conductive flow, replacing it with surface resistances and a convective heat transfer across gap.
A thermal bridge describes a situation where there is a direct connection between the inside and outside through one or more elements that are more thermally conductive than the rest of the building envelope. As a result, there will be wasteful heat transfer across that element, its internal surface temperature will be different from other, better insulated areas and there may be condensation where warm, moist internal air comes into contact with the, potentially cold, surface. This condensation can result in mould growth. See Thermal bridge for more information.
In practice, inside and outside temperatures do not remain constant (steady state) and the transfer of heat across a body is not instantaneous. Dynamic analysis of conductive heat transfer considers the changing temperature profiles on either side of a body and the time lag introduced by the rate of diffusion of heat through the body.
This time lag can be exploited by introducing thermal mass into the fabric of a building. Thermal mass describes the ability of a material to absorb, store and release heat energy. Thermal mass can be used to even out variations in internal and external conditions, absorbing heat as temperatures rise and releasing it as they fall. This can useful for evening-out and delaying extremes in thermal conditions, stabilising the internal environment and so reducing the demand for building services systems. See Thermal mass for more information.
[edit] Related articles on Designing Buildings Wiki
- Building fabric.
- Building services.
- Convection.
- Double glazing.
- Emissivity.
- Heat transfer
- Insulation.
- Long wave infra red radiation.
- Natural ventilation.
- Passive building design.
- Radiator.
- Solar gain.
- Solar radiation.
- Thermal bridge.
- Thermal optical properties.
- Thermal performance
- Thermal mass.
- U value.
Featured articles and news
Heat pump announcements, what homeowners need to know
An 'ultimate guide to heat pumps' from a heating company.
Construction contract awards reach £7.1bn in February
Their highest level in seven months.
The journey to sustainability in heritage
Research is the key to better understanding.
Heritage approaches to adaptation, mitigation and loss.
Bridging the gap between policy, finance and installation.
Development on brownfield land
Definition, background, policy and the latest consultation.
With the Design Framework for Building Services.
Retrofit of Buildings, a CIOB Technical Publication
Pertinent technical issues, measures and the roles involved.
ECA joins HSE campaign to support mental health
Working Minds’ five simple steps based on risk assessment.
Mental health in the construction industry
Mental health issues in brief with related articles.
Transitional arrangements, Building Control and the BSR.
For pre-October buildings with substantial progress by April.
How to write an inspection and test plan
ITPs for quality control and assurance particular elements.
Why quality counts in domestic ventilation systems
From products, to systems to the installation.
Empowering the Future with CIOB Academy
Lifelong learning, upscaling, and reskilling for the built environment.
Winners of the 2024 ASBP Awards
Project, Product and Initiative according to the 6 pillars.