- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 10 Jun 2018
Rising damp in walls - diagnosis and treatment (DG 245)
On 12 October 2007, BRE published Rising damp in walls - diagnosis and treatment (DG 245 revised edition), written by Peter Trotman.
- The rate of evaporation from the wall.
- The porosity of the wall.
- The salt content of the wall and soil.
- The groundwater height and saturation.
- Heating in the building.
Some accumulation of salts can occur in the walls of old buildings even when they do not have a damp problem, so high readings from a moisture meter alone are not conclusive. Appendix A of the 12-page digest describes how to drill samples from a wall in to test for moisture content and hygroscopicity, and the interpretation of moisture gradient profiles.
If a building has a physical damp-proof course (DPC), it is unlikely that it has failed, as most dpc materials have a long life, however, defects such as mortar droppings in a cavity wall, may make a dpc ineffective by bridging it and allowing moisture to pass up through the wall. This and other mechanisms by which an existing dpc might be bridged are discussed.
The content of the digest includes:
- Mechanism of rising damp.
- Determining the source of the dampness.
- Dry lining.
- Further reading.
- Appendix: The sampling method.
 Related articles on Designing Buildings Wiki
- BRE articles on Designing Buildings Wiki.
- Building Research Establishment.
- Damp-proof course.
- Damp proof membrane.
- Defects in brickwork.
- Dew point.
- Diagnosing the causes of dampness (GR 5 revised).
- Interstitial condensation.
- Mould growth.
- Penetrating damp.
- Psychometric chart.
- Rising damp.
- Sling psychrometer.
- Treating brickwork with sealant or water repellent.
- Understanding dampness.
 External references
- BRE Digest 245, Rising damp in walls - diagnosis and treatment.
- Good Repair Guide 33 - GRG33.
Featured articles and news
BRE partner with Global GreenTag to develop an Ethical Labour Sourcing Standard for Australia.
The Chartered Quality Institute explain the pathway to success for organisations implementing management systems.
An introductory article looking at where a duty of care can arise in the construction industry.
House of Lords committee encourages the use of off-site manufacturing in new report.
Computational fluid dynamics (CFD) can go some way to show the impact of new buildings on their surroundings.
The shortlist for the 2018 prize for the UK's best new building is revealed.
Amendment to Bill aims to provide councils with greater powers to increase tax premiums on empty homes.
As the latest summer blockbuster 'Skyscraper' is released, we look at some of the best uses of buildings in film.
Read our introductory article on how to layout a building.
New cross-party report calls for combustible cladding ban to be extended to all high-rise residential buildings.