- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 05 Mar 2017
Hemp lime construction: A guide to building with hemp lime composites
On 12 September 2008, BRE published Hemp lime construction: A guide to building with hemp lime composites (EP 85). It was written by Rachel Bevan, principal architect at Rachel Bevan Architects and Tom Woolley, professor of architecture at the Centre for Alternative Technology and chairman of the UK Hemp Lime Construction Products Association. It is the output of a Department for Environment, Food & Rural Affairs (DEFRA) funded study commissioned by the National Non-Food Crops Centre.
Hemp lime is a composite material used for walls, insulation of roofs and floors and as part of timber-framed buildings. It is most commonly a mix of renewably-sourced hemp shiv, a specially-formulated lime binder and water.
Whilst there is a growing awareness of the need to reduce the energy use of buildings in operation, there is still a tendency to construct them from materials that have a high embodied energy, or are in some way damaging to the environment. Hemp lime construction offers a real alternative.
It has good thermal and acoustic performance, and offers a zero-carbon solution for sustainable construction, able to capture and store carbon dioxide in the fabric of buildings. It is light weight, reducing the load on foundations, and so requiring less concrete. Hemp masonry is also breathable, able to absorb and emit moisture, allowing the construction of healthier buildings.
According to BRE’s Hemp Lime, An introduction to low-impact building materials by Andy Sutton, Daniel Black, and Pete Walker:
|It is particularly suited to projects where the design calls for a rendered or rain-screened external finish, good insulation and minimal thermal bridges. It is most commonly used in conjunction with timber frames, but can act as a non-structural walling element for a variety of construction types, including lining masonry walls.|
Hemp lime construction offers 120 pages of comprehensive guidance on the use of hemp lime for housing and low-rise buildings, providing practical information on materials, design and construction. It includes case studies and design details, and explains how the use of hemp-based material can capture and store carbon dioxide in the fabric of buildings.
Its contents are:
- What is hemp construction?
- Case examples of hemp lime buildings.
- Growing hemp for building.
- Building construction techniques.
- Mixes and materials.
- Durability, moisture, ventilation, indoor air quality and thermal performance.
- Structures, fire and acoustics.
- Life cycle and carbon sequestration.
- Natural products for use in conjunction with hemp lime.
- The advantages of hemp and lime.
- References and notes.
- Useful contacts.
 Related articles on Designing Buildings Wiki
Featured articles and news
A document can be called a bond or a guarantee. Does the name matter and what is the difference between them?
New briefing note is launched focusing on increasing knowledge of housing that promotes health and wellbeing.
Arbitration is a private, contractual form of dispute resolution used in the construction industry.
The European Parliament has approved a revised Energy Performance of Buildings directive.
One in six MPs supports the ring-fencing of retentions as proposed in the 'Aldous Bill'.
A stakeholder is anyone who has an interest in the process or outcome of a construction project.
BRE launches online self-assessment tool for ethical labour sourcing.
Tower refurbishment failed to meet safety standards on several counts, according to leaked report.
It may seem obvious but what does the term 'structure' refer to within a built environment context?
Carillion's liabilities could be much higher than previously thought, according to Receiver.
Photographing Historic Buildings, by the former head of photography at English Heritage.