Workplace humidity
In August 2017, BSRIA released a statement regarding the issue of humidity in workplaces.
It is well documented that humidity plays an important role in assuring the wellbeing of building occupants. In the UK, more than 80% of our time is spent indoors, and with approximately 90% of the associated costs of a building being staff related (1), providing good indoor environmental quality is essential.
The recommended levels of humidity vary depending on the situation (for example, offices, data centres, hospitals and so on). In some industrial applications (such as heritage or storage), moisture stability is essential for preservation. In offices, the generally accepted levels of humidity may range between 40 and 60% (2).
As a standalone parameter, humidity is unlikely to cause thermal discomfort and levels outside the 40-60% range can easily be tolerated. A 10% increase in relative humidity is felt to be as warm as a 0.3°C rise in the operative temperature (3).
Human perception of dry air is generally due to contaminated or too warm air rather than physical dryness (4) and air with high humidity is often perceived as odorous (5).
Blanca Beato-Arribas, Asset Performance Team Leader, BSRIA, said:
“Humidity extremes are undesirable and affect human comfort, productivity and health. Long periods of exposure to humidity levels under 35% should be avoided as they can cause eye irritation, throat and nose dryness (6). This is a common occurrence in aircraft, where humidity levels can be as low as 20 per cent (7).
"Low humidity levels can also increase static electricity, which is a bigger cause of concern in data centres, where equipment can be damaged (8) or in places where there might be risk of gases igniting (1).
"At the other end of the spectrum, high levels of humidity encourage bacteriological and mould growth (2, 6) and increase the chemical and sensory emission from water borne building varnish and paint (9), contributing to poor indoor air quality.
"In summary, controlling the humidity levels and regular maintenance of the systems in an office building will avoid future costly problems related to mould growth and also contribute to the wellbeing and productivity of the occupants.”
This article was originally published here in August 2017 by BSRIA.
--BSRIA
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
- BSRIA articles on Designing Buildings Wiki.
- Comfort in low energy buildings.
- Dry-bulb temperature.
- Evolving opportunities for providing thermal comfort.
- Heat stress.
- Heating.
- Indoor air velocity.
- Mean radiant temperature.
- Thermal comfort.
- Thermal pleasure in the built environment.
- Wellbeing and creativity in workplace design - case studies.
- Workplace air conditioning.
[edit] External resources
- Wellbeing and productivity in Offices report. World Green Building Council’s Health, 2014.
- Guide A Environmental design. Chartered Institution of Building Services Engineers, 2015.
- BS EN ISO 7730: 2005 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. BSI, 2006.
- Sundell, J, On the association between building ventilation characteristics some indoor environmental exposures, some allergic manifestations and subjective symptom reports. Indoor Air. Supplement no2/94 pp 5-49,1994.
- Fang L, Clausen G and Fanger P O, Impact of temperature and humidity on the perception of indoor air. Indoor Air vol 8, no 2, pp 80-90, 1998.
- Potter, I N, The sick building syndrome. BSRIA Technical Note 4/88, 1988.
- World Health Organisation http://www.who.int/ith/mode_of_travel/chad/en/
- Thermal Guidelines for Data Processing Environments. ASHRAE, 2015.
- Fang L, Clausen G and Fanger P O, Impact of temperature and humidity on chemical and sensory emissions from building materials. Indoor Air, vol 9, no 3, 193-201, 1999.
Featured articles and news
Impact report from the Supply Chain Sustainability School
Free sustainability skills, training and support delivered to thousands of UK companies to help cut carbon.
The Building Safety Forum at the Installershow 2025
With speakers confirmed for 24 June as part of Building Safety Week.
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
International Electrician Day, 10 June 2025
Celebrating the role of electrical engineers from André-Marie Amperè, today and for the future.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.