Carbon emissions in the built environment
The term ‘carbon emissions’ refers to the release into the atmosphere of carbon dioxide (CO2).
Carbon dioxide is a naturally-occurring colourless and odourless gas that is integral to life. It is also a greenhouse gas and the burning of carbon-based fossil fuels means there is more carbon carbon dioxide in the atmosphere leading to increased rates of climate change.
Carbon-based fuels that release carbon dioxide when burned include timber, coal, gas, oil, petrol, diesel and so on.
The amount of carbon released by a particular event, person, building or thing is typically referred to as its ‘carbon footprint’, and is measured in tonnes of CO2. On a individual level, the main contributors to a carbon footprint include the amount of type of energy that is used to heat the home, the use of electrical appliances, type of transport, amount of air travel, and so on.
The Building Regulations set out requirements for specific aspects of building design and construction. Regulation 26 of the building regulations states that 'where a building is erected, it shall not exceed the target CO2 emission rate for the building…'.
The target CO2 emission rate (TER) sets a minimum allowable standard for the energy performance of a building and is defined by the annual CO2 emissions of a notional building of same type, size and shape to the proposed building. TER is expressed in annual kg of CO2 per sq. m.
Energy performance certificates (EPCs), set out the energy efficiency rating of buildings. They are required when buildings are built, sold or rented, if they have a roof and walls and use energy to condition an indoor climate.
The establishment of the Climate Change Act 2008 committed the UK to reducing greenhouse gases by at least 80% by 2050 (compared to the 1990 baseline), with a reduction of at least 34% by 2020. A strategy for how this was to be achieved was set out in The Carbon Plan published in December 2011.
The commitment to reducing carbon emissions is a considerable, and often controversial, factor in the development of major infrastructure projects such as the third runway at Heathrow Airport, with activists arguing that its construction will tie the UK into an increased rate of emissions for many years.
In December 2006, the then Labour government committed that from 2016 all new homes would be ‘zero carbon’ and introduced the Code for Sustainable Homes, against which the sustainability of new homes could be rated. However, on 10 July 2015, the government published ‘Fixing the foundations: creating a more prosperous nation’ which made the surprising decision to scrap the zero carbon homes initiative.
[edit] Related articles on Designing Buildings
- Carbon capture and storage.
- Carbon capture processes.
- Carbon dioxide.
- Carbon dioxide equivalent.
- Carbon emissions reduction target CERT.
- Carbon factor.
- Carbon footprint.
- Carbon negative.
- Carbon neutral.
- Carbon Plan.
- Carbon ratings for buildings.
- Consumption emissions.
- Emission factor.
- Fugitive emissions.
- Greenhouse gases.
- Net zero carbon building.
- Operational emissions.
- Process carbon dioxide emissions.
- Reducing UK emissions: 2018 Progress Report to Parliament.
- Residual emissions.
- Target emission rate.
- The Carbon Project: improving carbon emission data.
- Upfront emissions.
- Zero net regulated carbon emissions.
Featured articles and news
Do you take the lead in a circular construction economy?
Help us develop and expand this wiki as a resource for academia and industry alike.
Warm Homes Plan Workforce Taskforce
Risks of undermining UK’s energy transition due to lack of electrotechnical industry representation, says ECA.
Cost Optimal Domestic Electrification CODE
Modelling retrofits only on costs that directly impact the consumer: upfront cost of equipment, energy costs and maintenance costs.
The Warm Homes Plan details released
What's new and what is not, with industry reactions.
Could AI and VR cause an increase the value of heritage?
The Orange book: 2026 Amendment 4 to BS 7671:2018
ECA welcomes IET and BSI content sign off.
How neural technologies could transform the design future
Enhancing legacy parametric engines, offering novel ways to explore solutions and generate geometry.
Key AI related terms to be aware of
With explanations from the UK government and other bodies.
From QS to further education teacher
Applying real world skills with the next generation.
A guide on how children can use LEGO to mirror real engineering processes.
Data infrastructure for next-generation materials science
Research Data Express to automate data processing and create AI-ready datasets for materials research.
Wired for the Future with ECA; powering skills and progress
ECA South Wales Business Day 2025, a day to remember.
AI for the conservation professional
A level of sophistication previously reserved for science fiction.
Biomass harvested in cycles of less than ten years.
An interview with the new CIAT President
Usman Yaqub BSc (Hons) PCIAT MFPWS.
Cost benefit model report of building safety regime in Wales
Proposed policy option costs for design and construction stage of the new building safety regime in Wales.
Do you receive our free biweekly newsletter?
If not you can sign up to receive it in your mailbox here.























