Types of bolts
Contents |
[edit] Introduction
A bolt is a type of fastener, usually made from metal, that commonly comprises a head at one end, a chamfer at the other, and a shaft characterised by an external helical ridge known as a ‘thread’. Bolts are typically used to hold materials or objects together, or to position objects.
The chamfer at the opposite end of the head provides a slightly bevelled edge which helps with inserting the bolt into holes and nuts. Bolts typically (but not always) require a nut which is applied via torque while the bolt is held in place (or vice versa). Vibration or dynamic loads may loosen nuts, necessitating the use of locknuts, lock washers or thread lockers which can provide resistance to loosening.
[edit] Bolts and screws
The terms ‘bolts’ and ‘screws’ are sometimes used interchangeably, and the distinction between them can be complex, however, in simple terms, a bolt passes through the materials it is fixing together (typically into a nut at the other side), whereas a screw threads directly into them.
Bolts are often made of steel, and where resistance is required to weather or corrosion, they may be galvanised, or stainless steel, brass, zinc or titanium may be used.
[edit] Types of bolt
There are many different varieties of bolt which can be selected based on the particular requirement or the materials involved. Some of the most common types include:
[edit] Anchor bolt
Usually embedded in concrete or masonry for structural applications.
[edit] Carriage bolt
Used to fasten metal to timber, with a squared undercut to the head which holds the bolt in place once it has been tightened.
[edit] Elevator bolt
Commonly used in conveyor systems, an elevator bolt has a flat, plain or countersunk head which holds the bolt in place when tightened.
[edit] Flange bolt
Also known as frame bolts, this type of bolt distributes the bearing load using a washer on the undercut of the head.
[edit] Hanger bolt
This type of bolt comprises two threaded ends instead of having a head, one of which contains a wood screw.
[edit] Hexagon bolt/Tap bolt
A hexagon bolt comprises a head that has six sides, with threading that begins part-way down the shank, whereas a tap bolt’s shank is threaded the whole length.
[edit] Huck bolt
A proprietary bolt in which the pin and collar are swaged together using a specialist tool to form a permanent fixing.
[edit] Lag bolt
Also known as lag screws, this is a heavy-duty fastener that creates its own mating thread in timber and other soft materials when tightened.
[edit] Machine bolt
This type of bolt has a short shank and is intended for assembling metal components through predrilled holes.
[edit] Plow bolt
This type of bolt is commonly used in construction tools and other devices due to its durability, and is characterised by its flat countersunk head and square shank neck.
[edit] Sex bolt
Rather than requiring a nut, the shank of sex bolts are covered with a ‘mating’ female component. These are useful for fastening components that cannot be exposed to abrasive threads.
[edit] Square head bolt
This is similar to a machine bolt in that it has a short shank, in addition to a four-sided bolt head.
[edit] Stud bolt
This type of bolt has hexagon nuts on both ends. Components are fastened between the two bolts.
[edit] Timber bolt
Bolts that are meant for use with large timber components.
[edit] T-head bolt
Has a T-shaped head which can be gripped by a wench and can fit into a slot with ease.
[edit] Toggle bolt
This type of bolt has an expanding wing-like nut which helps it to mount objects to walls.
[edit] U-bolt
Similar to staples, U-bolts are bent in the shape of a ‘U’ and are partially threaded on both ends.
[edit] Bolt heads
Different types of head include:
- Square shoulder: A truss head, shaped so as to allow fastening with the least amount of surface obstruction, on a square shank which resists rotation.
- Indented hexagon: For use with a wrench, this head has a circular depression in its top surface.
- Indented hexagon washer: Same as an indented hexagon, but with the addition of a washer section at the base to protect the assembly finish from the wrench.
- Hexagon (trimmed): Standard type of head, with clean corners that are trimmed to close tolerances.
- Hexagon flange: Similar to the indented hexagon washer, but the washer is conical or slightly rounded.
[edit] Related articles on Designing Buildings
- Adhesive.
- Clamp.
- Construction equipment.
- Construction staples.
- Construction tools.
- Cramp.
- Crimp.
- Fittings.
- Fixture.
- Fixing v fastening.
- Nails - a brief history.
- Off-site prefabrication of buildings: A guide to connection choices.
- Rivet.
- Staple.
- Strap.
- Structural fasteners.
- Structural steelwork.
- Types of fixings.
- Types of nails.
- Types of nuts.
- Types of screws.
- Types of washer.
- Welding.
Featured articles and news
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
Places of Worship in Britain and Ireland, 1929-1990. Book review.
The emancipation of women in art.
CIOB Construction Manager of the Year 2025
Just one of the winners at the CIOB Awards 2025.
Call for independent National Grenfell oversight mechanism
MHCLG share findings of Building Safety Inquiry in letter to Secretary of State and Minister for Building Safety.
The Architectural Technology Awards
AT Awards now open for this the sixth decade of CIAT.
50th Golden anniversary ECA Edmundson awards
Deadline for submissions Friday 30 May 2025.
The benefits of precast, off-site foundation systems
Top ten benefits of this notable innovation.
Encouraging individuals to take action saving water at home, work, and in their communities.
Takes a community to support mental health and wellbeing
The why of becoming a Mental Health Instructor explained.
Mental health awareness week 13-18 May
The theme is communities, they can provide a sense of belonging, safety, support in hard times, and a sense purpose.
Mental health support on the rise but workers still struggling
CIOB Understanding Mental Health in the Built Environment 2025 shows.
Design and construction material libraries
Material, sample, product or detail libraries a key component of any architectural design practice.
Construction Products Reform Green Paper and Consultation
Still time to respond as consultation closes on 21 May 2025.
Resilient façade systems for smog reduction in Shanghai
A technical approach using computer simulation and analysis of solar radiation, wind patterns, and ventilation.
Comments
Hi There,
Your content is very informative and appreciated. I am looking for information about different types of bolts and luckily I found your article. Thanks for sharing.