Calcium silicate brick
Calcium silicate, is used in the manufacture of a variety on materials such as calcium silicate board, pipe insulation and calcium silicate bricks, also known as sandlime bricks. In board materials it is often seen as a safe alternative to asbestos, although originally some calcium silicate boards contained asbestos fibres, today additives such as cellulose fibres are used instead along with small amounts of Portland cement and in some cases flyash.
Calcium silicate bricks are made primarily of readily available, naturally occurring materials and have some advantages in terms of the energy required to make them, compared to standard fired clay bricks. Silica sand, water and hydrated lime are left to cure to produce hydrated calcium silicate, formed in an autoclave at high pressure the resulting brick is durable and strong with densities between 1700-2200 kgm3 and strength of up to 10N/mm2.
These bricks are lightweight, and as such can be fragile at their edges, but have the advantage of good insulative qualities, of between around 1.0 to 1.5 W/mK when protected from moisture. The resistance to chemical damage of the calcium silicate brick is good and so it is less likely to suffer from surface deposits caused by efflorescence that may be found on clay brick or concrete.
Due to the nature of material and manufacture they can be used in high temperature environments without deformation or damage and are thus useful in fire protection strategies. Because the final product is homogenous and flat it can often require less mortar and is considered porous and hygroscopic, which means as such that breaths but is susceptible to drawing in moisture which in large quantities can dramatically reduce thermal performance. Though this also allows the material to be quite easily mechanically crushed and reformed into the similar types of brick products and coloured with pigments such as iron or chromium oxides or ochres to create red, green and yellow finishes.
[edit] Related articles on Designing Buildings
- Asbestos
- Blockwork.
- Brick.
- Brick bats and closures.
- Calcium carbide.
- Calcium carbonate.
- Calcium phosphate.
- Calcium silicate board.
- Cant bricks.
- Cavity wall.
- Common brick.
- Defects in brickwork.
- Engineering bricks.
- Flyash.
- How to lay bricks.
- Silcrete.
- Silica.
- Silicon.
- Testing bricks.
- The use of lime mortar in building conservation.
- Types of brick.
- Types of brick arches.
- Types of brick bonding.
- Types of concrete.
- Types of steel.
- Types of stone.
- Which way up should you lay a brick?
Featured articles and news
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.