Rising damp in walls - diagnosis and treatment (DG 245)
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
On 12 October 2007, BRE published Rising damp in walls - diagnosis and treatment (DG 245 revised edition), written by Peter Trotman.
Excess moisture is a common problem in buildings, and may be apparent from; damp patches, mould growth, mildew, salts, staining, ‘tide marks', blistering paint, bulging plaster and so on.
Rising damp is caused by capillary action drawing moisture up through porous elements of a building’s fabric. DG 245 considers the causes of rising damp in walls and how to remedy it if found.
Porous walls which stand in water or saturated soil without a damp proof course (dpc) can have rising damp to a height of more than 1m, with the height depending on:
- The rate of evaporation from the wall.
- The porosity of the wall.
- The salt content of the wall and soil.
- The groundwater height and saturation.
- Heating in the building.
Some accumulation of salts can occur in the walls of old buildings even when they do not have a damp problem, so high readings from a moisture meter alone are not conclusive. Appendix A of the 12-page digest describes how to drill samples from a wall in to test for moisture content and hygroscopicity, and the interpretation of moisture gradient profiles.
If a building has a physical damp-proof course (DPC), it is unlikely that it has failed, as most dpc materials have a long life, however, defects such as mortar droppings in a cavity wall, may make a dpc ineffective by bridging it and allowing moisture to pass up through the wall. This and other mechanisms by which an existing dpc might be bridged are discussed.
If it is necessary to provide a new moisture barrier, the digest explains methods such as; inserting a membrane or using chemical injection. The repair of plaster damaged by damp is also discussed.
The content of the digest includes:
- Mechanism of rising damp.
- Diagnosis.
- Determining the source of the dampness.
- Treatment.
- Replastering.
- Dry lining.
- Further reading.
- Appendix: The sampling method.
[edit] Related articles on Designing Buildings Wiki
- Assessing moisture in porous building materials.
- BRE articles on Designing Buildings Wiki.
- Building Research Establishment.
- Carbide meter.
- Condensation.
- Damp.
- Damp-proof course.
- Damp proof membrane.
- Defects in brickwork.
- Dew point.
- Diagnosing the causes of dampness (GR 5 revised).
- Does damp proofing work?
- Efflorescence.
- Electrical resistance meters.
- Interstitial condensation.
- Mould growth.
- Penetrating damp.
- Psychometric chart.
- Rising damp.
- Sling psychrometer.
- Spalling.
- Tanking.
- Treating brickwork with sealant or water repellent.
- Understanding dampness.
[edit] External references
Featured articles and news
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Quick summary by size, shape, test, material, use or bonding..
Comments