Improving a buildings appearance
Contents |
[edit] Introduction
The exterior finish of a building is an important feature. For many clients, beauty is only skin deep, and they will judge whether their builder has done a good job based on the finish. A building’s exterior also has to be finished properly to comply with the building regulations as poor workmanship could lead to a reduction in energy efficiency and water ingress.
Here are five tips on how to achieve the best results.
[edit] Tip 1: Check planning and advise the client
This is imperative as, while many small cosmetic changes will fall under permitted development, in some areas, planning laws will mean the exterior of a building will have to match other buildings around it. Whatever the outcome, advising and consulting with your client and the local authority is important. Offer advice on products and features that will add value, increase comfort and look great. This could include replacing concrete tiles with slate tiles, upgrading windows or adding Velux-style loft windows.
[edit] Tip 2: Get the pipework sorted
Repainting, repointing and rendering unsightly areas can really spruce up a property. The same goes for pipework – it can be ugly if not finished or maintained properly.
[edit] Tip 3: Choose your roof tiles, bricks or cladding carefully
Roof tiling can make a vast difference to the look of a property. Concrete tiles have a clean and smooth finish and can be the choice for some buildings, but clay tiles, for instance, can enhance a property with their different hues and colour variations. In conservation areas you can expect to see clay tiles specified. Either way, if you’re replacing tiles, neither concrete nor clay tiles will truly match the ones lost from an old original roof. If a client won’t stretch to all-new tiles, then removing any moss or lichen can transform the overall look of the property.
For those homes with mismatched bricks or dated cladding (like stone cladding), the surface can be renovated in a variety of ways. Updating the colour of a brick can work wonders for kerb appeal and bricks can be either painted or stained. The main difference is that painting requires maintenance while a stain is completely absorbed by a brick and is a permanent solution (care must be taken not to reduce the air-permeability of the brick).
If the condition of the bricks is too rundown, render or cladding can improve the appearance. uPVC or laminate cladding is easy to maintain and clean, stone tiles are lightweight and can offer a traditional look while brick slips look like solid brick but are tiles made from clay to create a brick effect. If the overall look of the building is being changed, planning consent may be required.
[edit] Tip 4: Windows
Windows are crucial to the appearance of a property, both in terms of size and aesthetics. Check planning rules and look at the type of brick before specifying the colour of the windows. They definitely don’t have to be the traditional white these days. They can look fantastic in a wide range of colours from dark green to grey or even black. Does your client want a specific window to be a key feature, e.g. a porthole style which illuminates an upper extension gallery, or bi-folds which open onto a garden? The options are numerous but important. Extension lantern rooflight windows have seen a huge rise in popularity and look great too.
[edit] Tip 5: Light it!
Lighting the exterior of a building, and the garden, used to be the domain of large, expensive houses, but that’s not the case any more. Exterior lighting can add security and enhance the look of a building quite cost effectively. Lighting placed either side of the front door gives a great feeling of symmetry. If the house has a front garden, subtle lighting hidden in undergrowth can look fantastic. Up/down lighting has been a recent trend and motion sensors can be utilised around the property to help the owner on dark nights, while still augmenting the overall image of a building.
Featured articles and news
Design and construction industry podcasts
Professional development, practice, the pandemic, platforms and podcasts. Have we missed anything?
C20 Society; Buildings at Risk List 2025
10 more buildings published with updates on the past decade of buildings featured.
Boiler Upgrade Scheme and certifications consultation
Summary of government consultation, closing 11 June 2025.
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
From project managers to rising stars, sustainability pioneers and more.
Places of Worship in Britain and Ireland, 1929-1990. Book review.
The emancipation of women in art.
Call for independent National Grenfell oversight mechanism
MHCLG share findings of Building Safety Inquiry in letter to Secretary of State and Minister for Building Safety.
The Architectural Technology Awards
AT Awards now open for this the sixth decade of CIAT.
50th Golden anniversary ECA Edmundson awards
Deadline for submissions Friday 30 May 2025.
The benefits of precast, off-site foundation systems
Top ten benefits of this notable innovation.
Encouraging individuals to take action saving water at home, work, and in their communities.
Takes a community to support mental health and wellbeing
The why of becoming a Mental Health Instructor explained.
Mental health awareness week 13-18 May
The theme is communities, they can provide a sense of belonging, safety, support in hard times, and a sense purpose.
Mental health support on the rise but workers still struggling
CIOB Understanding Mental Health in the Built Environment 2025 shows.
Design and construction material libraries
Material, sample, product or detail libraries a key component of any architectural design practice.