Concrete vs. steel
Concrete is a conventionally used material for construction while steel is now gaining momentum for its flexibility and reduced construction time. Both concrete and steel framed structures have environmental issues associated with their use, including a high embodied energy in their manufacture.
Concrete has some advantages; waste materials can be included within the mix, such as GGBS (Ground Granulated Blast-Furnace Slag) and PFA (Pulverised Fuel Ash). In addition, moves are being made to assess the potential of using recycled concrete, however, issues such as moisture content and material variability dictate that it is economically unviable.
Steel, while having a high lead time, is known for its fast erection on site. However, steel needs fire protection whereas within concrete this is inherent. Prefabrication of steel can allow thin film intumescent coatings to be applied offsite.
Efficiency within concrete construction is being improved by the adoption of hybrid solutions and innovations in formwork such as self-climbing forms. The use of precast concrete construction can also help to significantly reduce build time particularly where vertical elements are considered to be the main limitation.
Sacrificial probes can be integrated within concrete to provide strength determination at an early age and this is likely to help further improve construction methodologies.
Steel, being fast to erect, can allow the building to be occupied sooner. In addition, reduced labour costs are possible through dryness of form in comparison with concrete.
The construction of a steel framework is comparatively lightweight, as much as sixty percent lighter than a comparable reinforced concrete frame solution which might allow for a less expensive foundation system. In addition, modification to the building can sometimes be facilitated by simple removal of a structural steel member.
[edit] Related articles on Designing Buildings Wiki
- Architectural concrete.
- Concrete.
- Concrete frame.
- Concrete-steel composite structures.
- Galvanised steel.
- Glulam.
- Formwork.
- Intumescent coatings.
- Metal fabrication.
- Precast concrete.
- Prefabrication.
- Prestressed concrete.
- Rebar.
- Reinforced concrete.
- Stainless steel.
- Stainless steel vs. galvanised steel.
- Structural steelwork.
- Structural systems for offices.
- Sustainability.
- Thermal mass.
- Types of steel.
[edit] External references
- Steel Construction Institute; Steel Designers Manual 6th Edition 2003
- BRE - Innovation in concrete frame construction
- SCI publication 160 - Structural fire design: off-site applied thin film intumescent coatings 2nd edition
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
ECA's public affairs priorities
Member consultation opens to shape priorities for 2027 to 2030.
Dutyholder responsibilities from 1 July 2026.
Where performance meets practice
The Building Envelope Stage at UKCW Birmingham.
CIAT publishes briefing on planning reforms.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.
Building Regulations and Building Safety Act
CIOB publishes free advice for non-domestic clients.
Comments