Blinding
Contents |
[edit] What is blinding in construction?
In construction, 'blinding' typically refers to a base layer of weak concrete or sand that is laid above a layer of hardcore to provide a clean, level and dry working surface. A thin layer, usually around 50 mm (2 inches) thick, of blinding is poured over the hardcore, sealing in the underlying material and levelling off the surface.
The concrete used for blinding is weak compared with structural concrete, and can withstand lower loading. If necessary, steel mats can be used to reinforce either the entire blinding layer or the specific areas of high loading.
[edit] What is blinding for?
If a damp-proof membrane (DPM) is to be placed above it, the blinding will help prevent it from becoming damaged by the hardcore.
If a damp-proof membrane is not being laid directly above the blinding layer, it provides a sturdy surface on which a pavement, concrete floor, footing, raft foundation or reinforcement can be positioned, and it prevents the concrete from seeping down into the hardcore. It also reduces the amount of moisture penetrating up into the concrete.
A blinding layer can also provide a more useable working surface on construction sites, it creates a cleaner and more even site and provides a suitable ground for the storage of materials.
[edit] Alternative definitions of blinding
NB Culvert, screen and outfall manual, (CIRIA C786) published by CIRIA in 2019, gives an alternative definition of blinding as: ‘A temporary accumulation of impermeable debris on the lower part of a screen that creates a ‘weir’ effect, reducing the flow area and increasing upstream water levels. Preferred term is variable blockage.’ Where a screen is: ‘An arrangement of bars, grids or poles placed in a watercourse.’
[edit] Related articles on Designing Buildings
Featured articles and news
Futurebuild and UK Construction Week London Unite
Creating the UK’s Built Environment Super Event and over 25 other key partnerships.
Welsh and Scottish 2026 elections
Manifestos for the built environment for upcoming same May day elections.
Advancing BIM education with a competency framework
“We don’t need people who can just draw in 3D. We need people who can think in data.”
Guidance notes to prepare for April ERA changes
From the Electrical Contractors' Association Employee Relations team.
Significant changes to be seen from the new ERA in 2026 and 2027, starting on 6 April 2026.
First aid in the modern workplace with St John Ambulance.
Ireland's National Residential Retrofit Plan
Staged initiatives introduced step by step.
Solar panels, pitched roofs and risk of fire spread
60% increase in solar panel fires prompts tests and installation warnings.
Modernising heat networks with Heat interface unit
Why HIUs hold the key to efficiency upgrades.
Reflecting on the work of the CIOB Academy
Looking back on 2025 and where it's going next.
Procurement in construction: Knowledge hub
Brief, overview, key articles and over 1000 more covering procurement.
Sir John Betjeman’s love of Victorian church architecture.
Exchange for Change for UK deposit return scheme
The UK Deposit Management Organisation established to deliver Deposit Return Scheme unveils trading name.
A guide to integrating heat pumps
As the Future Homes Standard approaches Future Homes Hub publishes hints and tips for Architects and Architectural Technologists.
BSR as a standalone body; statements, key roles, context
Statements from key figures in key and changing roles.
Resident engagement as the key to successful retrofits
Retrofit is about people, not just buildings, from early starts to beyond handover.
Comments
[edit] To make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.