Approved Document A
The first set of national building standards was introduced in 1965. Now known as the building regulations, they set out:
- What qualifies as 'building work' and so fall under the control of the regulations.
- What types of buildings are exempt.
- The notification procedures that must be followed when starting, carrying out, and completing building work.
- Requirements for specific aspects of building design and construction.
The 'approved documents' provide guidance for how the building regulations can be satisfied in common building situations. There is no obligation to adopt the solutions presented in the approved documents, the building regulations can be satisfied in other ways.
Approved Document A: Structure, was last published in 2013.
It requires buildings to be designed, constructed or altered so as to be structurally safe and robust, and so as not to impair the structural stability of other buildings. It deals with the requirements that buildings should be able to withstand dead loads, imposed loads and wind loads, as well as ground movement such as swelling, shrinkage or freezing of the subsoil, or land-slip or subsidence.
It stipulates the design standards for use on all buildings and gives simple design rules for most masonry and timber elements for traditional domestic buildings. It includes diagrams of structures such as roof frames and brick walls, and tables of material strengths.
The content of the Approved Document includes:
- Section 1: Codes, standards and references for all building types.
- Section 2: Sizes of structural elements for certain residential buildings and other small buildings of traditional construction – This includes basic requirements for stability, sizes of certain timber members, thickness of walls in certain small buildings, proportions for masonry chimneys above the roof structure, and foundations of plain concrete.
- Section 3: Wall cladding – This includes guidance on technical approach, loading and fixings.
- Section 4: Roof covering – This includes guidance on materials and re-covering of roofs.
- Section 5: Reducing the sensitivity of the building to disproportionate collapse in the event of an accident – This includes an alternative approach and seismic design.
- Standards referred to.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
Comments