NHBC technical standards 2014
See: For more recent information, see: NHBC Standards 2019
[edit] Introduction
The National House Building Council (NHBC) is an independent regulator for the new homes industry. It is the UK’s leading standard-setting body and provider of insurance and warranties for newly-built homes. It is also the largest single approved inspector for the building regulations.
NHBC standards set technical requirements, performance standards and guidance for the design and construction of houses that are acceptable to the NHBC. They are available to download online, along with guidance notes, videos and other supplementary material for each section.
The 2014 standards are applicable to every NHBC registered home with foundations that was started on, or after the 1 January 2014, but before 1 January 2016. For homes started on or after 1 January 2016, see the NHBC technical standards 2016.
The 2014 standards are split into 10 parts with each one covering a particular aspect:
Part 1: General information:
- 1.1 Introduction to Standards and Technical Requirements.
- 1.2 A consistent approach to finishes.
- 1.3 No longer allocated.
- 1.4 Cold weather working.
Part 2: Materials:
- 2.1 Concrete and its reinforcement.
- 2.2 No longer allocated.
- 2.3 Timber preservation (natural solid timber).
Part 3: Ancillary technologies:
Part 4: Foundations:
- 4.1 Land quality – managing ground conditions.
- 4.2 Building near trees.
- 4.3 No longer allocated.
- 4.4 Strip and trench fill foundations.
- 4.5 Raft, pile, pier and beam foundations.
- 4.6 Vibratory ground improvement techniques.
Part 5: Substructure and ground floors:
- 5.1 Substructure and ground bearing floors.
- 5.2 Suspended ground floors.
- 5.3 Drainage below ground.
Part 6: Superstructure (excluding roofs):
- 6.1 External masonry walls.
- 6.2 External timber framed walls.
- 6.3 Internal walls.
- 6.4 Timber and concrete upper floors.
- 6.5 Steelwork.
- 6.6 Staircases.
- 6.7 Doors, windows and glazing.
- 6.8 Fireplaces, chimneys and flues.
- 6.9 Curtain walling and cladding.
- 6.10 Light steel framed walls and roofs.
- 7.1 Flat roofs and balconies.
- 7.2 Pitched roofs.
Part 8: Services and internal finishing:
- 8.1 Internal services.
- 8.2 Wall and ceiling finishes.
- 8.3 Floor finishes.
- 8.4 Finishings and fitments.
- 8.5 Painting and decorating.
- 9.1 Garages.
- 9.2 Drives, paths and landscaping.
Part 10: No longer allocated.
[edit] Related articles on Designing Buildings Wiki.
- BREEAM.
- British standards.
- Building regulations.
- Code for sustainable homes.
- Home quality mark.
- Lifetime homes.
- NHBC.
- NHBC Standards 2019.
- NHBC technical standards 2016.
- Passivhaus.
- Zero carbon homes.
[edit] External references
Featured articles and news
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Quick summary by size, shape, test, material, use or bonding..