Use of ceramics in construction
Contents |
[edit] Introduction
Ceramics are a material often used in construction, made from a mixture of minerals, typically silica sand, with a clay binder and some impurities, and up to 30% water. They are fired at a higher temperature than bricks, so that the silica re-crystallises to form a glassy material that has greater density, strength, hardness, resistance to chemicals and frost and a greater dimensional stability.
During firing, the water is driven off, though this may be reduced from 30% to 2-5% by drying before firing. At this reduced water content products are moulded as powder before being fired at 1,800-2,000 degrees for days or weeks at a time, depending on the ceramic and process details. Ceramics may have an as-fired appearance or be glazed (a glass-like coating).
These materials are environmentally stable - they will not oxidise further in the atmosphere, therefore, they are economical in terms of maintenance costs. Problems are likely to occur when they are combined with other materials, typically fixings which are highly stressed and subject to corrosion. If fixings fail, the result can be dramatic. Unlike metals, ceramics are not capable of ductile behaviour. They fail in a brittle manner, directly after their elastic limit.
[edit] Types of ceramics
[edit] Fire clays and shales
These products include ordinary bricks, clay roof tiles, flooring quarries and pavers.
[edit] Terracotta
This is literally ‘burnt earth’. It is made from yellow to brownish-red clays with a uniformity and fineness between brick and vitrified wall tiles. Terracotta is often used for unglazed chimney pots, air bricks, copings and planters.
For more information, see Terracotta.
[edit] Faience
This is a glazed form of terra-cotta or stoneware. The base material may be fired to the ‘biscuit’ stage before glazing and re-firing, or a ‘once-fired’ process may be used. The latter improves resistance of the glaze to crazing (the spread of lines or cracks on the glazed surface), but reduces the range of colours available.
For more information see: Faience.
[edit] Fireclay
This contains a high proportion of clay resistant to high temperatures (kaolin). It is used for chimney flue linings and firebacks.
[edit] Stoneware
This is similar in composition to fireclay, but is fired at a higher temperature than fireclay and contains a higher proportion of glass. As a result it is harder and less absorbent. Modern manufacturing processes mean that stoneware no longer has to be glazed for use in drainage pipes.
[edit] Earthenware
The raw materials are blended and may contain a considerable proportion of limestone. It is a finer product than stoneware and is used as the body for glazed wall tiles and table ‘china’. Water absorption may be up to 15%, however, making it less suitable for sanitaryware than vitreous china.
[edit] Vitreous china
This has a higher glass content than earthenware, and its water absorption is only about 0.5%, which makes it suitable for sanitary fittings. It is stronger than earthenware.
[edit] Porcelain
Porcelain is very similar to vitreous china, but is often made from purer materials under more strictly controlled conditions. It is used for special uses, such as electrical insulators.
[edit] New ceramics
These are also called ‘technical’ or ‘engineering’ ceramics. Their purity is far higher than traditional ceramics, not using raw clay mined directly from the ground. Powders are formed which are then cast, pressed, extruded or moulded into shape. The powders may be set in organic binders. The combination of pure materials and exacting production techniques ensures the very high strength of these materials.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.