Electrical test equipment for use on low voltage electrical systems GS38
Contents |
[edit] Introduction
Electrical test equipment for use on low voltage electrical systems was published in 2015 by the Health and Safety Executive. It is widely referred to as Guidance Note GS38 (fourth edition).
[edit] Electricity at Work Regulations 1989
GS38 is part of a series of electrical safety guidance notes associated with mandatory requirements set out in the Electricity at Work Regulations 1989. These regulations cover aspects such as design, installation and use of electricity in places of work.
The Electricity at Work Regulations 1989 require tradespeople, technicians, contractors and other professionals in control of all or part of an electrical system to ensure it is safe to use and that it is maintained in a safe condition. These requirements impose legal duties on electrically competent people to ensure that all aspects are covered.
Beneath these mandatory requirements sit other codes of practice and guides including GS38. Compliance with these, whilst not mandatory, can contribute significantly to proving that relevant parts of the mandatory requirements of the Electricity at Work Regulations have been met.
[edit] Specifics of GS38
Guidance included in G38 is intended for electrically competent people who use electrical test equipment on low voltage electrical systems and current test equipment. It is meant for those who may be involved in electrical testing, diagnosis and repair.
GS38 provides advice about how to select and use equipment in a safe manner for circuits with rated voltages not exceeding 1000V ac. Equipment covered in the guidance includes:
[edit] Related articles on Designing Buildings
- Electrical safety in the private rented sector.
- Electrician.
- Electrical safety.
- Electrotechnical Assessment Specification.
- Electrotechnical assessment specification for use by certification and registration bodies.
- Electrotechnical Assessment Specification guidance for installers.
- Safe isolation for low voltage.
- Safety.
[edit] External resources
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.