Span
[edit] Introduction
In structural engineering and architecture, ‘span’ is the term given to the length of a structural component – eg beam, floor, roof or floor truss – that extends (or ‘spans’) between two supports. Thus, a beam may be supported at either end, in which case it is said to span between the two points, and a floor may span between two (or three or even four) continuous supports.
A general engineering principle is the longer the span, the deeper the structural component will have to be to safely support its self-weight and whatever it must carry, eg a floor.
[edit] Span-to-depth (STD) ratio
Span-to-depth ratio (or span/depth ratio, also known as slenderness ratio L/h) is the ratio of the span length divided by the depth (or vertical height) of a component. It is an important parameter as it can affect structural behaviour, construction costs and aesthetics.
A 250mm-deep beam that spans 4m has a span/depth ratio of 16. If the span/depth ratio is less than two, the beam is considered to be ‘deep’. Eurocode 2 gives span/depth rules for designing reinforced concrete beams and slabs.
More dramatic span/depth ratios can be provided by space frames: a rectangular space frame may have a span/depth ratio of up to 40, while this can be as high as 60 for a skew space frame.
Span/depth ratios are useful in limiting the deflection of a member under service loads. Damage may result if limits are exceeded, eg cracking of plaster, partitions and supporting brickwork. If limits are exceeded wildly, catastrophic structural failure accompanied by potential loss of life may result.
In bridge design, span/depth ratio is an important parameter. The ratio relates the length of the bridge’s span to its girder depth. To ensure that design does not deviate substantially from past successful practice, the ratio is commonly chosen on the basis of experience and the typical values used on past bridges. A typical starting point for estimating bridge construction depths is to take an STD ratio of 20.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Registered building inspectors
Building types and conflicts of interest updates explaineed.
Engineering services still struggle with labour shortages
According to latest quarterly services survey of the sector.
Infrastructure that connect the physical and digital domains.
Harnessing robotics and AI in challenging environments
The key to nuclear decommissioning and fusion engineering.
BSRIA announces Lisa Ashworth as new CEO
Tasked with furthering BSRIA’s impressive growth ambitions.
Public buildings get half a million energy efficiency boost
£557 million to switch to cleaner heating and save on energy.
CIOB launches pre-election manifesto
Outlining potential future policies for the next government.
Grenfell Tower Inquiry announcement
Phase 2 hearings come to a close and the final report due in September.
Progress from Parts L, F and O: A whitepaper, one year on.
A replicated study to understand the opinion of practitioners.
ECA announces new president 2024
Electrical engineer and business leader Stuart Smith.
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
Tackling the transition from traditional heating systems
59% lack the necessary information and confidence to switch.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
Comments
[edit] To make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.