- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 15 Feb 2019
Common data environment CDE
In the UK, the Government Construction Strategy stated that the '...Government will require fully collaborative 3D BIM (with all project and asset information, documentation and data being electronic) as a minimum by 2016'. This represents a minimum requirement for Level 2 BIM on centrally-procured public projects.
Level 2 is the creation of a managed 3D environment with data attached, but created in separate, distinct discipline models. These separate models may originate with the client, architect, structural engineer, building services engineering, contractor, sub-contractors, suppliers and so on. A federated model is an assembly of these distinct models to create a single, complete model of the building.
The common data environment (CDE), is the single source of information used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team (i.e. all project information whether created in a BIM environment or in a conventional data format). Creating this single source of information facilitates collaboration between project team members and helps avoid duplication and mistakes.
Ownership of information within the CDE remains with the originator of that information. Individual models produced by different project team members do not interact, they have clear authorship and remain separate. This means that the liabilities of the originators are not changed by the incorporation of their model into the federated model. There may be complications however where ownership changes as the project progresses, for example replacing design team objects with specialist sub-contractor objects.
Generally, a licence is granted to the client to use the information contained in the separate models for the 'permitted purpose' (i.e. for the purpose for which that level of detail of information was intended). A sub-license from the client enables project team members to use models prepared by other project team members.
The CIC BIM protocol proposes that an information manager, appointed by the client, should set up and manage the common data environment. The information manager is essentially a procedural gate-keeper, policing the common data environment to ensure that it follows the agreed protocols and that the data is secure. They are not a BIM co-ordinator and have no design responsibility and no responsibility for clash detection or model coordination.
The common data environment may include a number of different information environments. It may include a supply-side common data environment used by the project delivery team, and an employer's information environment that provides an employer-side document and data management system for the receipt, validation and approval of project information delivered by suppliers.
PAS 1192 2: Specification for information management for the capital/delivery phase of construction projects using building information modelling, suggests that a CDE may use a project server, an extranet, a file-based retrieval system or other suitable toolset.
It proposes that the advantages of a CDE are:
- 'Ownership of information remains with the originator, although it is shared and reused, only the originator shall change it.
- Shared information reduces the time and cost in producing co-ordinated information.
- Any number of documents can be generated from different combinations of model files.'
And that, 'if the procedures for sharing information are consistently used by the design teams, spatial coordination is a by-product of using the CDE processes, and will deliver production information that is right first time... It provides the ability to produce traditional drawings or documents as views of multiauthored data within the CDE. It also gives greater control over the revisions and versions of that data.'
Information within the CDE can have a wide variety of status levels, however there will generally be four main areas of information, with a sign-off process allowing information to pass from one area to the next:
- Work in progress (WIP): This area is used to hold unapproved information for each organisation.
- Shared (or client shared) area: This information has been checked, reviewed and approved for sharing with other organisations, perhaps including the client.
- Published: This information has been authorised or accepted by the client or their representative (often the lead supplier (designer/constructor)).
- Archive: This area is used to create a constant record of progress throughout the lifecycle as well as all transaction and change orders.
A typical structure is illustrated below.
While this may sound complex, on small projects, the CDE might simply be common folders on server, or may use a free, web-based file sharing application. Even on large projects, where sophisticated software might be used, during the early stages of the project it might simply be matter of creating four folders in which files are stored, with files named in accordance with a standard naming protocol such as that outlined in BS 1192:2007 (now replaced by BS EN ISO 19650).
 Related articles on Designing Buildings Wiki
- Asset information.
- Asset information model.
- BIM object.
- BIM Task Group.
- Construction Operations Building Information Exchange (COBie).
- CIC BIM Protocol.
- Collaborative practices.
- Data drop.
- Excel and construction.
- Global Unique IDs (GUIDs).
- Government Construction Strategy.
- Industry Foundation Classes.
- Information manager.
- Model-based design.
- Native file.
- PAS 1192-2:2013.
- PAS 1192-3.
- Project information model.
- Soft landings.
- Supplier Information Technology Assessment form.
 External Resources
- Video: What is a Common Data Environment? By The B1M
Featured articles and news
Do you understand the different types of stone and which ones you should use where?
An ECA briefing for members about the commercial implications of leaving the EU.
A crucial moment on any project - and fraught with danger.
The performance gap from a Northern Ireland perspective.
Book review: Buildings of protestant nonconformity.
Design and testing for health and wellbeing - free download from BRE.
Retention in construction contracts.
Campaign for the reform of cash retentions.
The key points for the construction industry and BSRIA's response.
How to make roads safer: the debate continues.
What does the Northern Powerhouse mean for us?
The different types of bond in construction contracts.