Electric lock
An electric lock makes use of an electric current to operate a mechanism to either hold shut or release a securing system.
Very often they are encountered in or around buildings as part of access control systems.
Electric locks may be split into two basic groups: those where the physical securing is achieved by use of a magnetic holding force, and those where an electric current is used to physically move a bolt or latch, usually via a magnetic solenoid or motor action.
Magnetic locks or ‘maglocks’ are the most common type used in access control systems. They work on the principle that when an electric current is applied to an electromagnet, its magnetising force attracts and holds firmly a magnetic material such as iron or steel, and when the electric current is stopped, the magnetic force ceases.
The usual arrangement for a maglock on a door or gate consists of a large electromagnet which is fixed to the door or gate frame, and an accompanying steel plate, or armature, which is secured to the door or gate itself.
When powered, the door or gate is held securely to the electromagnet, effectively preventing it from being opened – even with force.
Another form of electric lock is where a solenoid mechanically operates a bolt into its keep, or directly operates the keep itself. The keep is the part of the lock on the door frame that the bolt engages with.
A solenoid is itself a simple electromagnet that converts electrical current into mechanical movement.
Controls such as an access control system can energise and de-energise electric locks. Such controls may often be activated via PIN code readers, proximity sensors or fobs, key code pads or remotely via manual switching in a secured area of the building.
Often, such access control systems need very careful design considerations with regards to how the control is handled during an emergency, when the door or gate might be needed for safety or escape. In some instances, designers may elelct to link such access control systems to the building’s safety systems such as fire alarms.
In all cases with electric locking systems it is essential to weigh up the need for absolute security on one hand, against safety egress and building evacuation logistics on the other.
It should also be noted that with any locking system, overall security will always be governed and limited by the strength of the door or gate and the frame into which it is secured.
--ECA
[edit] Related articles on Designing Buildings
- Access control.
- CCTV.
- Commercial security systems.
- Digital door lock market.
- ECA articles.
- Electric motor.
- Electrical energy.
- Electrical power.
- Entry control.
- Home security solutions market.
- How door locks work.
- Outbuildings security.
- Perimeter security.
- Proximity access control system.
- Security and the built environment.
- Security glazing.
- Types of alarm.
- Types of door.
- Types of lock.
- Visitor door entry system.
Featured articles and news
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.