Green wood timber
Contents |
[edit] What is green wood?
The term green wood (or green timber) refers to a type of timber which has been freshly cut, and because of its high moisture contents, it is softer to work with, more flexible and less brittle. It relates to the forest term 'greenwood' because it is considered to be living, green or active and thus containing more water, but it is also prone to greater movement and deformation as it looses that water, dries or seasons over time. The term greenwood refers to a living forest during the season when the leaves are lush and green. It was often used to describe an idealised forest setting for historical stories such as Robin Hood.
The opposite of green wood is seasoned wood, which is wood that has been left to dry in a covered area for a period dependent on the conditions and type of timber.
[edit] Moisture in green wood explained
Moisture content, or %MC, is the measurement of how much water is present in wood compared to the dry matter of the wood. Although not very common, technically, it is possible to have a moisture content of over 100% and up to 200%, this happens when there is more water than wood in the sample being tested. Green wood has significantly more free water in it than seasoned wood, this means it is less stable and likely to move as it seasons.
A guide to the use of urban timber (FB 50), written by Geoff Cooper and published by BRE on 31 July 2012, defines green timber as: 'A term used to describe wood which has been freshly cut and still contains a high percentage of moisture (free moisture).'
Free water or free moisture refers to water that is stored in the cell cavities, water that is stored within the cell walls is referred to as bound water. The higher the %MC of the timber, the more free water it contains between the cells, and green wood tends have very high levels of moisture, up to 100% or more. This is significantly higher than the Fibre Saturation Point (FSP) which is around 30%, under this percentage the bound water is within the cells. The drying of bound water generally has a greater impact on the shape or form of timber.
[edit] Traditional green oak frame
Once seasoned, timber becomes more stable and harder, so most timber products are seasoned before use, however traditional green wood or green oak framing makes use of non-seasoned wood to ease cutting and preparation of the timber frames, particularly of the joints. Traditional timber frames are a common part of UK and European vernacular buildings, most would have been built using green wood joints with timber dowels that removed the need for metal fixings.
Timber dowels are small round pins, usually of oak or a similar material that has been seasoned. The dowel is dry when it is inserted into a joint of green wood, so it soaks the moisture from the freshly cut wood and expands. The expansion of the dowel creates a tight fixing for the green wood. Over time and exposure to the elements, the frame and the dowel season, become drier and harden and create a rigid connection and stable frame.
Many traditional houses of the oak frame tradition were constructed this way. Often a frame would be left for a year without cladding to allow it to season and become rigid. It would then be clad and walls in-filled with wattle and daub.
[edit] Contemporary green oak frame
Innovative use of green wood in contemporary architecture has included the construction of timber gridshells, in particular the Weald and Downland Living Museum gridshell built by Edward Cullinan Architects, Buro Happold and the Green Oak Carpentry Company. This gridshell structure used the flexibility of green wood oak, through a diagonal grid of laths laid flat on supporting scaffold, the edges lowering gradually over weeks, forming a three hump shell. Once in position the laths, secured at the edges to curve base frame, created a stable structure which over time dried and seasoned, hardening to becoming a rigid curved building frame.
For more information and photographs of the construction visit https://www.cullinanstudio.com/project-downland-gridshell.
For more information about the Weald and Downland Living Museum visit https://www.wealddown.co.uk
--editor
[edit] Related articles on Designing Buildings
Featured articles and news
Boiler Upgrade Scheme and certifications consultation
Summary of government consultation which closes 11 June 2025.
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
Places of Worship in Britain and Ireland, 1929-1990. Book review.
The emancipation of women in art.
CIOB Construction Manager of the Year 2025
Just one of the winners at the CIOB Awards 2025.
Call for independent National Grenfell oversight mechanism
MHCLG share findings of Building Safety Inquiry in letter to Secretary of State and Minister for Building Safety.
The Architectural Technology Awards
AT Awards now open for this the sixth decade of CIAT.
50th Golden anniversary ECA Edmundson awards
Deadline for submissions Friday 30 May 2025.
The benefits of precast, off-site foundation systems
Top ten benefits of this notable innovation.
Encouraging individuals to take action saving water at home, work, and in their communities.
Takes a community to support mental health and wellbeing
The why of becoming a Mental Health Instructor explained.
Mental health awareness week 13-18 May
The theme is communities, they can provide a sense of belonging, safety, support in hard times, and a sense purpose.
Mental health support on the rise but workers still struggling
CIOB Understanding Mental Health in the Built Environment 2025 shows.
Design and construction material libraries
Material, sample, product or detail libraries a key component of any architectural design practice.
Construction Products Reform Green Paper and Consultation
Still time to respond as consultation closes on 21 May 2025.
Resilient façade systems for smog reduction in Shanghai
A technical approach using computer simulation and analysis of solar radiation, wind patterns, and ventilation.