Gable roof
A gable roof, might be considered one of the most standard kinds of roof, where two halves of the roof meet at the highest point in a centre line, pitching down to an overhang on the side walls. The stright sides are closed up to the pitch by the gable, gable walls or gable ends which form an upper triangle enclosing the roof space.
Traditionally gable roofs were often cold timber roofs with the rafters laid at an angle, cut in at the top with bird mouth notches to sit on the ridge beam at the highest point, and tied together at the bottom with perpendicular tie beams. All parts working together structurally to form trusses, with the space above the tie beams being the vented cold roof space, usually vented at the eaves (where the joint of the rafters and tie beams sit on the supporting walls) and the space below being the warm insulated space, often with insultation between and above the tie beams. Other additions to the trusses to increase strength of efficiency might include king posts, queen posts and purlins, forming different types of trusses, roof formed of trusses that include purlins might also be called purlin rooves.
Other specific descriptions of a gable roof might include front gable, side gable and cross gable. A side or front gable simple describes where the gable end is in relation to the street, at the front or entrance to the house or at the side, with the pitch roof coming to the front. A cross gable roof is where two or more building blocks, with roof gable meet perpendicular to one another, thus creating a valley roof at the point where the two pitches meet and run into a valley gutter.
There are also other varieties of what might be called a gable roof, such as the Dutch gable and the box gable. The dutch gable being a hybrid between a hip roof and a gable roof, where the primarily hip roof has a gable roof at its uppermost point. The box gable is a standard gable, with the difference being at the gable ends, where the gable at the roof height protrudes from the wall below the gable end, so the gable ends overhang the wall as such.
For other related articles see types of roof, domestic roofs and types of truss.
See also: Gable and inverted gable.
[edit] Related articles on Designing Buildings
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.