Cast iron
The term 'cast iron' refers to a range of iron-carbon alloys, with a carbon content that is typically between 2 and 4%. During the Industrial Revolution, before the widespread development of the steel industry, cast iron was commonly used in a wide range of architectural applications because of to its relative affordability.
Cast iron is manufactured by re-melting pig iron along with quantities of limestone, silicon and carbon (and sometimes scrap steel). Traditionally, cast iron is melted in a blast furnace known as a cupola, but it can also melted in electric induction furnaces or arc furnaces. The molten cast iron is then poured into a holding furnace or ladle ready for casting (that is, being poured into a mould, and allowed to cool).
The advantages of using cast iron derive from its relatively low melting temperature, which increases its usability, and its good compression strength. However, it is weak in tension and bending, and will fracture before it bends or distorts. It also loses strength and stiffness when subjected to high heat.
In comparison with wrought iron or steel, cast iron is non-malleable, hard and brittle.
[edit] Related articles on Designing Buildings
- Aluminium.
- Conservation of Architectural Ironwork.
- Copper.
- Difference between cast iron and wrought iron.
- Failure of cast iron beams.
- Ferrous.
- Galvanised steel.
- Investment casting.
- Iron.
- Ironwork.
- Metal.
- Metal fabrication.
- Stainless steel.
- Stove.
- Structural steelwork.
- The Iron Bridge.
- Types of metal.
- Weathering steel.
- Wrought iron.
- Zinc
Featured articles and news
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
International Electrician Day, 10 June 2025
Celebrating the role of electrical engineers from André-Marie Amperè, today and for the future.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.
Skills England publishes Sector skills needs assessments
Priority areas relating to the built environment highlighted and described in brief.
BSRIA HVAC Market Watch - May 2025 Edition
Heat Pump Market Outlook: Policy, Performance & Refrigerant Trends for 2025–2028.
Committing to EDI in construction with CIOB
Built Environment professional bodies deepen commitment to EDI with two new signatories: CIAT and CICES.
Government Grenfell progress report at a glance
Line by line recomendation overview, with links to more details.
An engaging and lively review of his professional life.
Sustainable heating for listed buildings
A problem that needs to be approached intelligently.
50th Golden anniversary ECA Edmundson apprentice award
Deadline for entries has been extended to Friday 27 June, so don't miss out!
CIAT at the London Festival of Architecture
Designing for Everyone: Breaking Barriers in Inclusive Architecture.
Mixed reactions to apprenticeship and skills reform 2025
A 'welcome shift' for some and a 'backwards step' for others.