Ashlar post
An ashlar, ashlar post or ashlar piece is a traditional timber framing term. It describes a short timber upright which runs between the rafter and the inner face of the wall of a masonry building, it completes a small triangle at the end of a roof truss (at the end of each purlin). These small timber pieces are crucial in allowing the truss to sit completely on a masonry wall and can be seen in many traditional timber roof structures sitting on masonry or brick walls, wherw the tie beam is raised higher than the middle of the rafters.
[edit] Related articles on Designing Buildings
- A history of timber framing.
- Batten.
- Brander.
- Bridging.
- Collective restraint systems.
- Domestic roof.
- Dwang.
- Flitch beam.
- Flooring.
- Glulam.
- Herringbone strut.
- Joist.
- Laminated veneer lumber LVL.
- Nogging.
- Plenum.
- Portal frame.
- Purlin.
- Plywood.
- Raised floor.
- Rafter.
- Roofing defects.
- Sistering floor joists.
- Strut.
- Timber.
- Types of roof.
- Wall ties.
- Batten.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The cost of employing people remains a concern.
Code of Practice for Electrical Energy Storage Systems.
ECA calls on members to comment on draft 4th edition.
Bringing together expertise and creating cultural benefits.
CIOB celebrates positive Ofsted report.
The Building Safety Regulator announces a call for evidence.
Government approach could undermine delivery and regeneration.
World's first mass timber data centre.
The overlooked environmental aspect of data centre development.
Introduction to radon awareness
New technical information sheet published by CIOB.
Updated supplier guide can help electrical contractors engage with NHP.
CIAT confirm the winners of the 2026 architectural technology awards.
Government launches a one stop shop for flood preparedness.
Sir Edwin Lutyens: Britain's greatest architect? Book review.