- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 15 Mar 2018
Sealants in construction
Sealants are used in construction to prevent fluids and other substances from passing through material surfaces, joints, or openings. They can also prevent the passage of air, sound, dust, insects, and so on, as well as acting as a firestopping component.
Sealants are typically used to close openings between that are too small for other materials such as concrete, timber or mortar to be used. They have a wide range of properties in terms of strength, flexibility, appearance permanence, solubility, corrosion resistance, and so on.
While some sealants have adhesive qualities, they differ from conventional adhesives in that they tend to have lower strength and higher elongation. This means that they can be used more flexibly between substrates with different properties.
Historically, materials such as plant resins, mud, grass and reeds were used as sealants. Glazing putty was first used in the 17th century as a means of sealing window glass into the panes. Sealants were first chemically manufactured in the 1920s, in the form of acrylic, butyl and silicone polymers. Synthetic-polymer-based sealants became widely available for use in construction by the 1960s.
The three basic functions of a sealant are as follows:
- Fill a gap between two or more substrates.
- Form a barrier through which other substances cannot pass.
- Maintain sealing properties for the anticipated lifetime.
These functions can be achieved by matching the most suitable sealant to the substrate materials, i.e. one that will have adequate bonding properties and be flexible enough to tolerate anticipated movement, and so on.
Sealants may have a high viscosity, meaning that they do not flow from where they are applied, or a low viscosity, allowing them to penetrate into a substrate. Anaerobic acrylic sealants are able to cure in the absence of air, whereas surface sealants require air to cure.
Some of the most common types of sealants include:
- Acrylic resins
- Butyl rubber
- Epoxy thermosets
- Expanding foam
- Hot wax
- Latex sealants
- Metal sealants
- Paint sealants
- Polysulfide sealants
- Polyurethane sealants
- Rubber sealants
- Silicone sealant
- Urethane sealants
- Stamped-steel caulk gun: The least expensive type, which can be disposed of after use.
- Manual caulk gun: Heavy duty for moderate construction use. Has a strong steel body and cast iron handle.
- Bulk caulk gun: This is used for fast application and is designed to accept sealant supplied in bulk.
- Air-powered caulk gun: Capable of pumping high viscosity sealants at high speed and in large volumes.
 Related articles on Designing Buildings Wiki
Featured articles and news
The Isle of Man’s naturally-occurring materials and distinctive building techniques.
BRE partner with Global GreenTag to develop an Ethical Labour Sourcing Standard for Australia.
The Chartered Quality Institute explain the pathway to success for organisations implementing management systems.
An introductory article looking at where a duty of care can arise in the construction industry.
House of Lords committee encourages the use of off-site manufacturing in new report.
Computational fluid dynamics (CFD) can go some way to show the impact of new buildings on their surroundings.
The shortlist for the 2018 prize for the UK's best new building is revealed.
Amendment to Bill aims to provide councils with greater powers to increase tax premiums on empty homes.
As the latest summer blockbuster 'Skyscraper' is released, we look at some of the best uses of buildings in film.
Read our introductory article on how to layout a building.