Winter energy crisis: ECA advice for managing power cuts
Leading electrotechnical and engineering services body ECA has promised to support its Members who may be asked to design and install emergency power systems in the event of emergency power cuts this winter.
Energy providers and National Grid have warned of potential power cuts caused by supply fears following the war in Ukraine. Worst-case government scenarios estimate that energy systems could be severely disrupted for up to a week.
ECA Senior Technical Manager Gary Parker said:
“Because of an unprecedented combination of factors including surging demand, supply concerns, and a cost-of-living crisis, our Members and their clients are facing a tough winter.
“ECA has seen an uptick in Members asking for advice and help reviewing their clients’ systems and recovery plans. We are here to support Members with advice and guidance on how to best design and install additional and stand-by systems that can meet their clients’ needs.
“It is important to remember that the UK’s electricity network is one of the most reliable in the world. However, we must be prepared for all eventualities, and the electrotechnical sector will be on the front line if emergency power cuts do occur.”
Those deemed most at risk for the effects of power cuts over the winter include pensioners, care home residents, and people in sheltered housing, schools, and other buildings which may not have energy contingency plans in place.
Electrical designers and installers are encouraged to visit ECA’s Technical website, where Members can access a wide range of technical guidance notes, bulletins, and the ECA Technical helpline, at eca.co.uk/technical.
This article was issued as a press release and appears on the ECA Today website as "Winter energy crisis: ECA’s advice for managing power cuts" on December 8, 2022
--ECA
[edit] Related articles on Designing Buildings
Featured articles and news
Do you take the lead in a circular construction economy?
Help us develop and expand this wiki as a resource for academia and industry alike.
Warm Homes Plan Workforce Taskforce
Risks of undermining UK’s energy transition due to lack of electrotechnical industry representation, says ECA.
Cost Optimal Domestic Electrification CODE
Modelling retrofits only on costs that directly impact the consumer: upfront cost of equipment, energy costs and maintenance costs.
The Warm Homes Plan details released
What's new and what is not, with industry reactions.
Could AI and VR cause an increase the value of heritage?
The Orange book: 2026 Amendment 4 to BS 7671:2018
ECA welcomes IET and BSI content sign off.
How neural technologies could transform the design future
Enhancing legacy parametric engines, offering novel ways to explore solutions and generate geometry.
Key AI related terms to be aware of
With explanations from the UK government and other bodies.
From QS to further education teacher
Applying real world skills with the next generation.
A guide on how children can use LEGO to mirror real engineering processes.
Data infrastructure for next-generation materials science
Research Data Express to automate data processing and create AI-ready datasets for materials research.
Wired for the Future with ECA; powering skills and progress
ECA South Wales Business Day 2025, a day to remember.
AI for the conservation professional
A level of sophistication previously reserved for science fiction.
Biomass harvested in cycles of less than ten years.
An interview with the new CIAT President
Usman Yaqub BSc (Hons) PCIAT MFPWS.
Cost benefit model report of building safety regime in Wales
Proposed policy option costs for design and construction stage of the new building safety regime in Wales.
Do you receive our free biweekly newsletter?
If not you can sign up to receive it in your mailbox here.
Comments
[edit] To make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.