Sarking in roof constructions
The term ‘sarking’ can have a number of different meanings relating to roof construction.
Sarking boards are typically softwood boards that are attached to the rafters of a pitched roof, below the roof-covering. They are typically around 150 mm wide and are used to provide additional support and strength to the overall structure.
They are used on buildings that can be exposed to high winds, heavy rain or other extreme weather conditions. As a result, they are more common in Scotland than in England or Wales. Boards tend to only be specified for new-build, not refurbishments, as this would entail a complete re-roofing with coverings being removed and replaced, and potentially exceeding the load-carrying capacity of the roof structure.
A typical roof build-up that contains sarking is as follows (from the bottom):
- Insulation (sitting either between-and-under or between-and-over the rafters).
- Sarking boards (with a gap of 2-3 mm between each one).
- Breathable membrane.
- Roof tiles or other covering.
The term 'sarking' can also refer to a pliable membrane such as a layer of felt, polystyrene or reflective foil, that insulates or reflects heat and can provide extra weather resistance. It can act as a protective second skin for the roof by helping to prevent storm-driven rain penetrating into the roof cavity. By helping to reduce draughts, it can also limit dust entering the building through gaps around downlights and vents, and help improve thermal performance.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
Plumbing and heating for sustainability in new properties
Technical Engineer runs through changes in regulations, innovations in materials, and product systems.
Awareness of the Carbon Border Adjustment Mechanism
What CBAM is and what to do about it.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.
The Sustainability Pathfinder© Handbook
Built environment agency launches free Pathfinder© tool to help businesses progress sustainability strategies.
Government outcome to the late payment consultation, ECA reacts.
IHBC 2025 Gus Astley Student Award winners
Work on the role of hewing in UK historic conservation a win for Jack Parker of Oxford Brookes University.
Future Homes Building Standards and plug-in solar
Parts F and L amendments, the availability of solar panels and industry responses.
How later living housing can help solve the housing crisis
Unlocking homes, unlocking lives.
Preparing safety case reports for HRBs under the BSA
A new practical guide to preparing structural inputs for safety cases and safety case reports published by IStructE.
Male construction workers and prostate cancer
CIOB and Prostate Cancer UK encourage awareness of prostate cancer risks, and what to do about it.