Roughcast
Contents |
[edit] Introduction
Roughcast is a traditional type of render – an external surface application that has been used for centuries in Britain both for aesthetics and to provide protection against the weather, particularly in exposed and coastal areas.
[edit] Composition
Roughcast typically comprises a crushed aggregate of washed gravel (or stone chippings) and coarse sand, mixed with slaked lime. Variety can be imparted by using stones of varying colours. In recent times, cement is often added to the mix, either for economy or in the mistaken belief that a stronger surface finish will result.
In addition to climatic and aesthetic reasons, roughcast has also been used to conceal poor workmanship e.g unsatisfactory brickwork or rubblestone masonry. It was often used for this purpose on common buildings and outbuildings, particularly the panels of timber-framed buildings.
Roughcasting is also a convenient solution for curved walls, where the use of brickwork, blockwork or coursed stone would otherwise involve much higher labour costs and skilled workmanship.
Roughcast became a popular rendering technique between the 1890s and the 1930s as part of the Arts and Crafts movement which sought to revive traditional building processes as part and parcel of vernacular architecture. Today, it is more likely to be seen as a ‘home improvement’ surface on brick-faced terraced houses in urban areas. However, even this use is becoming less popular.
[edit] Application
In earlier times, the wall to be rough-casted was first coated with a 12-18mm layer of lime and sand. The rough cast was subsequently ‘thrown’ onto this using a trowel. Apart from the inclusion of cement, the modern variant of the technique may be applied mechanically, if not by trowel.
It is believed that application by throwing can be more durable than trowelling; this may be because as the roughcast is thrown against the wall with some force, it ends up better compacted and achieves better adherence to the wall as a result.
[edit] Roughcast vs pebbledash
Nowadays, builders frequently use the terms ‘roughcast’ and ‘pebble-dash’ synonymously, but there is a difference between the two. In roughcast, the stones are mixed with the mortar and then thrown onto the wall; the result is a uniform colour effect throughout that is said to have a visual softness.
On the other hand, pebbledash makes use of only small, washed pebbles but no lime: the mortar is thrown against the wall and the pebbles subsequently thrown in, allowing their subtle colouring to show through. The Arts and Crafts architect CFA Voysey was very keen on pebbledash, not just for aesthetic reasons, but also because it was cost-effective and durable.
These characteristics have led to pebbledash being used widely in post-war housing, often as a means of covering-up poor workmanship. It remains a popular building material in Scotland, where it has been common practice to incorporate beach shingle, which typically contains significant quantities of sea-shells.
More recently, pebbledash and roughcast have come into disrepute, although in many cases this is mostly due to their misapplication or inappropriate use. They are often criticised for being unsightly and non-breathable, as well as for failing to take account of the individual historic fabric of buildings. Pebbledash is even thought to reduce the value of a property by up to 5%.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
International Electrician Day, 10 June 2025
Celebrating the role of electrical engineers from André-Marie Amperè, today and for the future.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.
Skills England publishes Sector skills needs assessments
Priority areas relating to the built environment highlighted and described in brief.
BSRIA HVAC Market Watch - May 2025 Edition
Heat Pump Market Outlook: Policy, Performance & Refrigerant Trends for 2025–2028.
Committing to EDI in construction with CIOB
Built Environment professional bodies deepen commitment to EDI with two new signatories: CIAT and CICES.
Government Grenfell progress report at a glance
Line by line recomendation overview, with links to more details.
An engaging and lively review of his professional life.
Sustainable heating for listed buildings
A problem that needs to be approached intelligently.
50th Golden anniversary ECA Edmundson apprentice award
Deadline for entries has been extended to Friday 27 June, so don't miss out!
CIAT at the London Festival of Architecture
Designing for Everyone: Breaking Barriers in Inclusive Architecture.
Mixed reactions to apprenticeship and skills reform 2025
A 'welcome shift' for some and a 'backwards step' for others.