Recouperative heat exchanger
A recouperative heat exchanger is normally a higher temperature heat exchanger with short exchange periods, the materials used can be metal or plastic. It is a more direct form of heat exchange than a regenerative heat exchanger and therefore more efficient over shorter periods. Flat plate heat exchangers are normally recouperative heat exchangers.
A regenerative heat exchanger is is where heat is exchanged via temporary storage or heat sink, it is therefore more reliant on longer exchange periods but can run at lower temperatures. One substance is absorbed by a heat sink and then passed to the next substance via the heat sink without contact.
In the design and operation of buildings,centralised heat recovery units often use crossflow flat plate exchangers and are therefore recouperative exchangers whereas single room heat recovery extractors are often regenerative, thus using a medium to store and then exchange the heat collected.
[edit] Related articles on Designing Buildings
- Coefficient of Performance CoP.
- Dynamic thermal modelling of closed loop geothermal heat pump systems.
- Earth-to-air heat exchangers.
- Ground preconditioning of supply air.
- Ground source heat pumps.
- Mechanical ventilation of buildings.
- MVHR.
- Ground source heat pumps.
- Renewable energy sources: how they work and what they deliver: Part 3: Electrically driven heat pumps DG 532 3.
- Regenerative heat exchanger.
- Thermal labyrinths.
- Thermal storage for cooling.
Featured articles and news
Edmundson Apprentice of the Year award 2026
Entries now open for this Electrical Contractors' Association award.
Traditional blue-grey slate from one of the oldest and largest UK slate quarries down in Cornwall.
There are plenty of sources with the potential to be redeveloped.
Change of use legislation breaths new life into buildings
A run down on Class MA of the General Permitted Development Order.
Solar generation in the historic environment
Success requires understanding each site in detail.
Level 6 Design, Construction and Management BSc
CIOB launches first-ever degree programme to develop the next generation of construction leaders.
Open for business as of April, with its 2026 prospectus and new pipeline of housing schemes.
The operational value of workforce health
Keeping projects moving. Incorporating unplanned absence and the importance of health, in operations.
A carbon case for indigenous slate
UK slate can offer clear embodied carbon advantages.
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.